Where has my Digi001 sound gone?

Discussion in 'Mixing' started by thesixthchamber, Feb 23, 2002.

Tags:
  1. I recently re-installed my Digi001 system on my G4 and this time cannot get any sound out of the track playbacks. Everything is functioning properly on screen and everything was installed according to the Digi001 Quick Start Guide. I've tested the headphones I'm using to make sure they were not the problem. Ideas, anyone?
     
  2. anonymous

    anonymous Guests

    Joined:
    Feb 10, 2001
    Create a master fader? See if any signal is present on the mixers meters?

    perhaps take off any plug ins on the master fader?

    ???
     
  3. Kev

    Kev Well-Known Member

    Joined:
    Nov 13, 2001
    Check your I/O page to see if all is routed correctly.

    Also check the channel strips for your output routing. They are going to the stereo bus.

    Check that monitor switch on thefront of the 001. I fall for that once in a while.
     
  4. damster

    damster Member

    Joined:
    Jan 17, 2002
    Ask your question at the Digidesign user conference 'DUC' in the digi001/mac section.I'm sure sure you will be well serviced there. :tu:
     

Share This Page