"Write to end" on SSL G-series automation?

Discussion in 'Compressors / Limiters (analog)' started by torsig_1967, Apr 1, 2004.

  1. torsig_1967

    torsig_1967 Guest

    Is there an equivalent to "write to end" on the SSL G-series mixing automation/ultimation. I can't find it in the manual.

    With "write to end" I mean this:
    All mixing data from the current position and foreward in time are overwritten with the current fader position. The difference from "update absolute" is that you don't have to play through the whole piece to overwrite data. Whenever you stop the current position will be kept from this point foreward.

    I've used this method on Fairlight and found it a great way of working. Is there some trick with SSL to accomplish the same thing?
  2. djui5

    djui5 Guest

    In the automation set-up window there's a "on rollback" parameter that has a "write to end" option...I think that's what your looking for. It works when you roll back, aka stop then return to a previous point in the timeline

    Which board are you working on?
  3. torsig_1967

    torsig_1967 Guest

    Thank's I'll have a look at that parameter next time I work on that desk.

    It's a 4000G+, from around 1995 i think, with motorized fader unit SL569.
  4. RecorderMan

    RecorderMan Distinguished Member

    Mar 28, 2001
    don't work on ssl much anymore...use to be a guru back in the e & g days (that means; don't asl me about 'J'...where's "E-CUE" LOL):

    type: 'name' 'here' 'end' 'mix' 'execute'....or 'name' 'here' and a cue location or time code number and then 'execute'. That will tell/fool the computer into thinking that it is at the end of the song. After you do the normal end mix command to finnish that mix. Don't forget at this point now to hit play for a momment..the computer thinks your at the end of the song..if you don't and proceed as normal then it will go past the beggining of the song,etc. Make sense?
  5. djui5

    djui5 Guest

    I'd agree with RM. I was talking about the 9J series, and haven't done automation on a 4K.....

Share This Page