yamaha ls9 + 4 x digimax fs... wordclock needed?

Discussion in 'Converters / Interfaces' started by rfreez, Apr 2, 2008.

  1. rfreez

    rfreez Active Member

    Joined:
    Jun 17, 2006
    Location:
    Chennai, India
    Home Page:
    i'm looking over the equipment list soon to be installed in a local concert hall i'm associated with... it struck me as strange that the contractor had spec'd out 4 x digimax fs talking to a yamaha ls9 digital mixer over ADAT... do i need to be worried about the lack of a master clock?

    thanks,
     
  2. d_fu

    d_fu Guest

    If you connect ADAT both ways and set the mixer as master, you won't need a separate clock generator.


    Daniel
     
  3. Boswell

    Boswell Moderator Well-Known Member

    Joined:
    Apr 19, 2006
    Location:
    UK
    Home Page:
    ADAT syncing will work, but this is a case for distributed wordclock. Take the wordclock out of the LS9 and daisy-chain it using 75 Ohm cable and T-pieces to each of the DigiMax FS units. Have the 75 Ohm termination switch pushed in on the last FS unit in the daisy-chain and out on the others. Easy.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice