Skip to main content

I have a chance to pick up a couple trident series 70 channels strips, full strips but,.. Ill have to have them racked. cost will be around $400.00 for pair before racking. Good Deal or stay away.how much can I expect to spend for racking, any suggestions on some one who is good. thanks to all.

Topic Tags

Comments

anonymous Tue, 02/05/2002 - 05:15

The strips are longer than 19" so you'd have to mutilate them to put them in a standard rack. I'd knock together a wood enclosure and buy a PowerOne +18V/-18V PSU. Finding the mating connector to the module would make the wiring much easier. The LEDs need +5V if you want 'em, and don't forget an outboard phantom supply, there's no switch on the module. If you want the schematics or pin outs I can post a link for you.
The price sounds right, last pair of Trimix modules I saw went for $355 at ebay. HTH

anonymous Tue, 02/05/2002 - 11:47

Hello.

I was thinking about doing the same thing but when I asked around here (orlando, FL) the electrical techs freaked! Noone seemed to know how to connect those bad boys. i am sure there is someone out there that can at a reasonable price. Who is David Marquette and how do I get in touch with him? Sorry for my ignorance in advance :)

Thanks,
Michael

pete Wed, 02/06/2002 - 05:43

Thanks all ...and especially Fletcher sorry for the double post had to make a decision and tried to get some answers quick. Talked to David Marquette and he said it would be expensive to rack em, so I will look elsewhere. thanks to all, the guy will posting em on ebay if anyone wants to look for em.