Well I go with the L2 into the Genelecs and the loudness blow me away. I have to turn the output down to listen to the music but I can't record over the digital outpu of course cause the signal is too low.
What shall I do?
:(
Tags
Comments
Originally posted by Michael Fossenkemper: you have your system
Originally posted by Michael Fossenkemper:
you have your system setup wrong. you should be using some kind of preamp to your monitors. I'm not sure what you have and how it's setup but the way you described, isn't the best way.
Ok DAT = L2 = Genelecs
or Desk = L2 = Genelecs
I can turn the monitors down to -6 dbs but it's still loud.
The Finalizer's got for example an analog output but the L-2
How would you do it?
Thanks alot - Vagelis
The correct setup would be. Desk > L2 > preamp to control the
The correct setup would be.
Desk > L2 > preamp to control the volume to the speakers. So the L2 would feed both your preamp and you 2track master. ideally you would be able to switch between the output of your L2 and 2 track in your preamp. If your using a conventional console, it has a preamp built into it. If your using just the output of your workstation, you will need to purchase a preamp that has several inputs.
you have your system setup wrong. you should be using some kind
you have your system setup wrong. you should be using some kind of preamp to your monitors. I'm not sure what you have and how it's setup but the way you described, isn't the best way.