I am using a powermac G5 / digi002 and I am having a problem hooking up the digimax lt with the 002. I have had the unit for a few months but didn't need it until now. The digimax hooks up via lightpipe...when I arm the track in Pro Tools and select the digimax inputs the line clicks/clips - even when I don't have a mic/instrument hooked into the input. i have the sample rates matched...does anyone know why this is happening ?
Comments
Like TVpostSound said, you need to clock the Digi 002 to the Dig
Like TVpostSound said, you need to clock the Digi 002 to the Digimax. I have the same setup so I'm assuming that your connecting the Digimax to the digi 002 through the ADAT connection. You can clock through the ADAT cable so you don't need anymore cables. Go to Setups, Hardware Setup and set the clock to ADAT. It should get rid of your problem.
thanks yeah i thought that the digi002 was already clocked to t
thanks
yeah i thought that the digi002 was already clocked to the digimax...because it worked flawlessly when i first purchased the unit and was testing it out...apparently in the 3 months or so of me not using it things got misconfigured. All is well and in great working order. Thanks
Ben
removed
removed