hi! i've got a problem with the outputs of the EZdrummer in DP5:
i choosed a new instrument (EZdrummer). i choosed the multiple outputs in EZdrummer. In DP5's bundles window i can see the following channels:
EZdrummer 1 3
EZdrummer 1 4
EZdrummer 1 5
EZdrummer 1 6
EZdrummer 1 7
EZdrummer 1 8
EZdrummer 1 9
EZdrummer 1 10
EZdrummer 1 11
EZdrummer 1 12
EZdrummer 1 13
EZdrummer 1 14
EZdrummer 1 15
EZdrummer 1 16
so, what are these channels for? when i swizch to the mixer window, i only can see 1 channel (the instrument channel) for the EZdrummer.
but i want to route the 8 EZdrummer channels to 8 analouge outputs?
how can i do that?
thanx in advance for your help!
meikl*
++++++
and here's another one who has the same problem...:
I went to bundles in DP and added 7 EZD tracks and in EZD mixer I made the tracks multi so all the instruments were on there own tracks. In DP the EZD tracks are listed EZD 1-3 to EZD 1-16 what is up with that? I would think it would start at EZD 1-1. I have tried setting EZD in DP bundles as mono then as stereo tracks. In stereo they run as 2 tracks like EZD 1-3/4.
Now when I go to the tracks window in DP only one channel of EZD shows up, so I went to project add tracks I tried to do this with both stereo and mono tracks. Here is what happens DP adds more instances of EZD with all the memory of required of a new instance. My memory counter on EZD goes crazy and tries to run from 264 Meg up to (264 meg X 7). All I want is to be able run the instruments in EZD on there own tracks so I can add effects. What am I doing wrong? How do I do this?