Help me please!
My setup is vocal/ guitar into mixer (Yamaha MG 10/2) into computer (Audiophile 2496), then back into mixer then to monitors.
I know this is possible as I had this setup working before - but I can't for the life of me figure out how to do this now - I keep getting the signal from the computer looping back into the computer - whereas I need this signal to be separate
- does anyone have this mixer I know its pretty popular? or perhaps someone who has a better understanding of recording could help me sort this mess out?
here's a link to a picture of the mixer:
http://upload.wikimedia.org/wikipedi...maha_mg102.jpg
Please someone help me!
thanks
Dave
Comments
FYI your image link doesn't work. You need to check that your m
FYI your image link doesn't work.
You need to check that your mixer is not routing the computer signal to the outputs, which it probably is.
Mic -> channel 1 -> aux 1 AND main fader up
Guitar -> channel 2 -> aux 1 AND main fader up
Computer -> channel 3 -> EITHER but not both
Whatever one you send the computer to, record from the other.