subwoofer for NS10
I just got a pair of NS10 set up in my studio. (been using genelec 1030 before).
The NS10 sound great and really honest! But I need to get a subwoofer as well.
Does anyone know what sub would work great together with the NS10? Is the yamaha SW10 a good choice or should I go with the KRK sub? Or is there something else out there that's even hotter ;) ?
I'd appreciate if anyone with experience could give me some advice!
By the way: Hi everyone!
What subwoofer goes well with NS10?
Don't bother using a sub with near field monitors. If you do however, invest in a professional monitor controller as well.
The Dangerous Monitor ST is a great choice.A good monitor controller is just as important as the sub-woofer, which we explain in detail throughout recording.org
Get there consumer version. Models beginning with the prefix YST...get the biggest wattage one thay make. JJP hipped me this (Although I haven't used mine for awhile....lazy)
I use them with Gen. 1031a's
[ July 06, 2003, 04:39 PM: Message edited by: Kurt Foster ]
It's just more work to get a sub going and have that translate honestly into your mix as well. It's nice to have a thumping control room but I get it from my B speaker set up when I need it.
Personally I have time for only one remix from every mix, and I usually dont have to do that, because I know my speakers too(alesis monitor ones), and I have a sub, which however accutarte or inaccurate it may be, gives me a look at the low end, and allows me to make informed decisions about content. I use a 10" sony consumer sub, (cant see the model # because it's hidden behind 200 cables!)and I have been happy with it.
Johan, I have heard that both tascam, and tannoy make excellent subs. Also if you are looking at consumer audio, mission,and paradigm have some really good values.
Unless you are mixing dance music for club use, it is unlikely that the sub bass that you are concerned about is ever to be heard. If you are mixing dance music, then good for you. You will likely need multiple remixes though.
In the end it's whatever translates the best. If your mixes translate well using a sub then rock on. It's my personal opinion that often they hinder rather than help.
A good friend recently installed a subwoofer in a well known facility.
The first problem was space, and location for the beast. The second was the xover points were not matching up well.
I have tried the subs myself, even with larger speakers. I found that my acoustics and positioning had a lot to do with not getting down to spec, it's ok now, and I don't use the subs anymore.
What was explained to me, on the NS-10, for judging low end content was to watch the extension of the low end driver.
Put on some music you know has the content, and watch that motion. IOW, the low end content you add, bass, kick, will show a difference in the extension with respect to each other. Watch it using your favorite reference music.
The sub frequency adjustments you make for extension from that point will be for moving air. Really down there. There is a ratio % for bass and kick, your reference may show it, but the exact amount of each escapes me right now, sorry. :(
With this visual reference, you can translate your sub adjustments to other systems. It will take some time and practice.
Just a suggestion,