I'm using logic pro 8 and i have a Yamaha n8 and i would like to have the soft ware respond through the mixer (n8). The logic I'm still trying to understand so will you give me a step by step on this project thank you
Comments
ok, i see what you mean by "steinberg"... but he does have log
ok, i see what you mean by "steinberg"...
but he does have logic, so maybe i can help.
i don't have the software in front of me at the moment, and mine is in german, so the terms might differ a bit.
go to preferences -> audio -> devices -> core audio
there's a drop down labeled "devices". there you must select the yamaha n8 driver.
btw, here's a picture of the panel i've just found:
http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/TS2462/TS2462-01.jpg
Now i did try that and im still trying to send the logic mixers
Now i did try that and im still trying to send the logic mixers in the yamaha n8. the n8 i have it being receive from logic however now i need the output of logic to go back in the n8 so that they can respond together because right now when i do vocals it's not being control by the n8 so thats is where im stuck at so another step by step will help so that i can move on thank you
so you receive a signal from the n8 but can't get a signal back
so you receive a signal from the n8 but can't get a signal back to it.
normally when the device is set in the preferences pane, it should act as an input and output.
have you set the outputs of your tracks to the outputs of the n8? you can do that with the buttons above the faders in the logic mixer. it's usually set to output 1-2, which is the main output of the audio interface. but you should be able to select other outputs like "output 3-4" or "output 5-6". i'm not sure though how it works with the yamaha. the manual of both (yamaha and logic) should help you. or a google search.
btw, some punctuation in your posts might make them more understandable.
Steinberg.
Steinberg.