hi i recorded a song and added cuabse Eq's and effects to it, when i did a audio mixdown to a mp3. file it lost all of this infomation ! is this ment to happen? and if so is there anyway of making it not do it
did you bypass the effects or are they muted? (sometimes if you solo something not connected to those fx this occurs)
are the fx routed to your stereo output bus - look at the fx channel strip and make sure it is routed to your main stereo outs and not some other virutal outs or disconnected.
if you still have no joy log into cubase.net and post on the forum, you will probably get numerous answers within a few hours
Comments
Hi, Are you using sx3 or sx1? Did you select the proper BUS (in
Hi,
Are you using sx3 or sx1?
Did you select the proper BUS (in sx3) for mixdown?
In sx1 you can choose to do mixdown with or without effects.
sx3
sx3
Check the following things did you bypass the effects or are th
Check the following things
did you bypass the effects or are they muted? (sometimes if you solo something not connected to those fx this occurs)
are the fx routed to your stereo output bus - look at the fx channel strip and make sure it is routed to your main stereo outs and not some other virutal outs or disconnected.
if you still have no joy log into cubase.net and post on the forum, you will probably get numerous answers within a few hours
okay thanks everyone !!! how do you select the bus?
okay thanks everyone !!! how do you select the bus?
the easiest way is to either do it on the channel strip, or righ
the easiest way is to either do it on the channel strip, or right mouse click on the effect, or use the device panel setup.
thanks !!
thanks !!
If You'll go to the Cubase fourm and enter your Dongle number yo
If You'll go to the Cubase fourm and enter your Dongle number you'll find all the help you'll ever need for SX.
Larry
By the way your answers are in the Cubase manual.