Tell us everything that you are doing and all gear you are using during recording and we can probably help.

Hi Mike,

Are you mixing reference levels by sending a -10 source to the +4 inputs of the Mbox? Take a look at your "Hardware Setup" in the "Setup" menu and adjust it to match your source signal. Good luck!

Hello. I am running a codenser mic straight to my mbox. i have the input level on the mbox set to three quarters and did some adjusting in PT. still having problems with getting the levels above midway.

Which mic is it? Do you have the source button set to 'mic'?

MXL 2001 and Yes, i have it set to Mic. I even have the playback knob turned all the way to input.

Any suggestions?

u got phantom power?
dunno if thats on the mbox... but most condensers need phantom power

Plug into another channel - If nothing, plug another mic in - If nothing, change cables - If nothing... Uh... Play louder? Turn the mic around? You got me...