Skip to main content

I am currently digitizing my vinyl collection, and am running into a problem. After the record is done recording (skip free) I play back the file and there are "skips" in the track.

I have tried adjusting latency, unhooking from the web, and just about every other tip, all to no avail.

I am using the M-Audio Quattro, and have tried this with a plethora of recording software (Sonar 3.0, Adobe Audition, etc...) and I'm having the same problem with all.

The skips are always in the same spot, so I know its a recording issue, and not a playback issue.

Grrr...please help!

Tags

Comments

anonymous Sun, 01/16/2005 - 19:14

what signal are you monitoring while recording? are you sure it's the output? are you listening through the direct monitoring on the back of the quattro?

also, the latency shouldn't be an issue becuase you'd just hear it late not skipping. is it a skip in the sense that it just repeats over and over and over and never finishes? or is it more of a jump in the track?

and finally, are you going straight from the deck to the quattro? or is there a dj mixer in the middle?

urgh! i'm thinking hard, mate! :)

anonymous Mon, 01/17/2005 - 07:09

Re: ?? Vinyl Recordings "skipping" after recorded

4onthfloor wrote: I am currently digitizing my vinyl collection, and am running into a problem. After the record is done recording (skip free) I play back the file and there are "skips" in the track.
please help!!

Sounds mostly as a set up problem with your soundcard while recording.
*What driver do you use for incoming audio?
*Try and record without monitoring thru your card.

anonymous Wed, 01/19/2005 - 07:44

the thing is, when you're monitoring off the quattro, you're actually monitoring the INPUT signal. ideally, you want to hear the output. can you monitor off your software instead? that way you can compare what you're hearing and be sure whether it's a record or playback issue. i'm not entirely conviced it's a playback thing yet.

also, try plugging up the deck straight to the quattro. it's cuts one more thing out of the signal path. it's just good to cheeck it out.

hummmmm.........