We usually record scratch rhythm guitar track with click, that feed both click and scratch to the drummer and record drums, then record guitars bass solos than vocals. I had a hard time to record drums to a track that have been recorded with out click.... it was a disaster and stress! Drummer was good though guitarist was bad.

Playing to click can be a pain to some people who aren't used to it.

You can have it both ways: Settle on a tempo with a click, allow it to run for the first 30 seconds or so of the song, then turn it off - this allows the drummer to get into the groove and he can then loosen up once it's off.

It's a bit complicated when there are timing changes throughout.

Try practicing the song a few times with the click in your drummer's ears, and a few without.

doing the same thing myself

hi there,

im tracking drums in my shed by myself and have been having the same questions & thoughts.. recording drums first with a click track is really hard for a few reasons such as my skills as a drummer (I'm ok, just not pro), and difficulty staying in time with a metronome (I can hardly hear the metronome in samplitude, and I don't want to turn it up super loud.. note I've even turned off microphone monitoring and am just hearing click track in my headphones). What I think I'll do is play rhythm guitar to the metronome first and maybe bass, then play drums along to it since I'm better at those instruments and simply am more likely to get the song on the right track (no pun intended).

ill try and let you know how it goes..

adios
michael

If you can record to a clik, it's usually going to give you the most options.
- You can punch in drums
- You can fly parts from one part of the song to another.
- Tracks will go down faster.
- You won't have to argue about who's ahead or behind the beat.

You don't have to be spot on as long as eveyone agrees that the result is good. If the whole chorus is rushing the clik but comes back together for the verse, that's fine. Just make sure everyone follows the drums.
Also- there's no rule that says you have to have the same tempo for the whole song. You can program clik tracks to change tempo where needed.
You can also have the clik do half notes. That can give the drummer a little more freedom. (Sometimes the drummer needs a tight leash, so you can also do it the other way and give him eight notes.)
Bottom line, find a method and a happy medium that can keep eveyone together and yet not sound mechanical.
As with most things, it takes a little work.

I am a fan of not using a click when i do not have to. that is in cases where I can lay down the bed tracks all together as a band, and do not need to add any MIDI to it later.
I prefer a song to breath a little bit. But I dont want the tempo to be all over the place at the same time. What I do, is have the band play with a click for a few bars till every one locks into the feel of the song, then I take it away from them.

But with some bands, a click is must. other wise keeping tempo is impossible. It can be really helpful from a producers stand point. if you feel the band is getting to loose you can pump up the click in their cans so they have t focus more on it (same thing works when you are doing over dubs, but you can use your drums instead of a click).

also with a click you can do things like record the chorus at a slightly faster tempo to give the track more energy with the hook. Well there are plenty of click centered production techniques. However when given the chance to work with one or not, I typically choose not to, if the band is tight enough

When i record drums i first make a "follow mix". wich usually is made with 1 mic, a guitar, a vocal line and a click.

Why?

Cause I, as a drummer, want:
1. The guitar to give me the nonchalant rythem.
2. The vocals to give me enthusiasm and dynamics.
3. The click to give me accuracy.

This has worked very well for me, and guests in my home studio aswell.

If you have an easy time laying down tracks to a click it's probably better not to use it. If you have a hard time using a click, you probably should use it. In other words, practicing with a metronome is one of the best ways there is to improve your playing, but the real goal is to have great time internally. In the long run, learning to play with a click will make you a better band. It may or may not make this particular recording better.

Im replying from my phone so please excuse the typos. One way I have done this in the past is to write it the drum part using samples and sequencer for the drummer as well as the other musicians to follow.

Sometimes I will write a basic track and sometimes the drum parts verbatim. This seems to make things easier for everyone instead of trying to follow a lifeless click.

Hope this helps

~Steve

We cannot do this however with our originals and are debating whether to use a click track/metronome in keeping time, or having our drummer do without it.

If the drummer is having a difficult time with it give this duty to another band member. Maybe the bass guy can follow the click and get the feel and keep the time. When I was in band in HS the conductor used to keep time for us. Maybe someone could do this for you, keep a visual time signature going with snapping fingers or waving hands.

I haven't done it here yet but I am going to rig up a flashing tempo light, I think this might aid in keeping the organic feel while having the accuracy always available.

Good luck,

Having a clik makes better use of digital replacement.

Having a clik makes for boring static sounding music.

Having a clik teaches meter as well as a Nun with a ruler.

Having a clik eliminates the need for disagreements about the time signature.

Having a clik makes it necessary to have a good headphone system.

Having a drummer with a great clock inside is better than any mechanical device.

I like HansAm's idea the best.

When I'm working a song out , alone, I will always put down the basic beat on the drum machine and play several instruments to it to learn the feel. With the basic feel, you can be behind, on top of, or pushing the beat without errors and still be able to move parts around in an edit.

The thing to remember through all of this, is its all about what you feel in the music you create, and being able to translate that feeling into life through a recording takes whatever brush strokes necessary to get'er'done.

I usually program a beat for the drummer to play to, instead of a cowbell, or woodblock click track. I keep it simple so it doesn't distract or take away from the drummers performance.
I find, in general, a drummer can find a better groove with a programmed beat rather then a sterile click.

Just my opinion,

IMO that would throw me off horribly, rather than playing to a click.

But thats just me.

Davedog wrote: Having a clik makes for boring static sounding music.

Not always.

Depends on the band/song/performance, etc.

IMO being able to play to a click track isn't necessarily knowing how to play like a robot. A drummer that can play to a click knows how to rush a little a head or behind the click when going through fills and such. Also, you can create a click track that has tempo changes. You have to go through the song a few times with the drummer to map it out, but it is done quite often.

In my limited experience....

The bands that need a click track can't play to them and the bands that can play to them don't need them.

Davedog wrote: Having a drummer with a great clock inside is better than any mechanical device.

therecordingart wrote:
The bands that need a click track can't play to them and the bands that can play to them don't need them.

Amen to that!

One solution is to rehearse to death WITH the click, and then do the sessions without.

I've done live performances where we had to work with a click to run MIDI tracks. Our drummer was very solid and had no problem, the performances were still exciting and in no way stiff or robotic. He was always complaining that he couldn't hear the click, which was because he was so in the pocket he never drifted from the it.

Thanks for the tips everyone! It will help us a great deal to keep these pointers in mind.

-Dan