Sometimes, I really *friggin* hate computers! :(
I am trying to install a new Adaptec 1200A RAID ATA/100 controller, in my IBM 300GL running W2K.
During POST, I get an error that is telling me that there is an adapter checksum problem with the PCI bus and the PNP...I took out the only other PCI card I had...(an ethernet card), and tried moving the Adaptec card to each of the different PCI slots...any other ideas?
The specific error message is:
"1805 PCI/PNP Error! Adapter ROM checksum error."
Thanks!
DH
Comments
make sure the Plug and Play Bios is turned off in your main BIOS
make sure the Plug and Play Bios is turned off in your main BIOS for your motherboard. Also sometimes there is a setting for PCI 2.1 Compliancy in the BIOS...make sure it's on. Otherwise if it's still not working reset the BIOS to default settings and try again...if not I suspect a bad card...
Opus
I tried everything to get the Adaptec card to work...flashed the
I tried everything to get the Adaptec card to work...flashed the BIOS in the IBM (Adaptec's suggestion), moved the card, turned off PNP, even bought a new card just in case...no go.
Bought a new Maxtor card, worked first time out of the box. Obviously some compatibility issue.
Grrrrr...*computers*! (Can't live with 'em...can't live without 'em.)
DH