Skip to main content

I have a m audio mobilepre usb and I'm using Sony acid pro 5.0 and 6.0. my question is when i go to record its only recording in one channel. ive set everything to stereo but still no luck what am i doing wrong here? :!:

Comments

hueseph Mon, 12/18/2006 - 17:14

Stereo Source(two mics) stereo recording. Mono source(one mic) mono recording. I'm a assuming you're using a crack. Either that or you spent a grand on software and didn't bother to read the manual. Not to mention you have little to no experience with recording actual audio signal. I realize this is loop based software, but crack heads bother me so I'm a little suspicious.

anonymous Tue, 12/19/2006 - 04:00

hueseph wrote: Stereo Source(two mics) stereo recording. Mono source(one mic) mono recording. I'm a assuming you're using a crack. Either that or you spent a grand on software and didn't bother to read the manual. Not to mention you have little to no experience with recording actual audio signal. I realize this is loop based software, but crack heads bother me so I'm a little suspicious.

First off dick head oviously i dont have a lot of experience recording im learning. If i did know a lot about it i wouldnt be on her asking for advice. Secondly acid pro isnt a grand dumb ass you can buy it brand new for 100.00. And also if i was running a crack dont you think i can download the manual off the web site! Morons bother me!

hueseph Tue, 12/19/2006 - 07:44

Acid Pro 6 on it's own is $374.00

https://www.sonymediasoftware.com/shopping/item.asp?pid=383&disp=1
(Dead Link Removed)

If you bought Acid pro 5 You would have paid about the same. Ok Not quite a grand but $600.00 if you paid for and upgrade instead of a full version of 6.

If you got Acid pro 6 for $100, you bought yourself a crack my friend.

So you have the manual but didn't read it?

x

User login