looking for a decent distant kickdrum mic.
Not a 3000$ monster.
merci beaucoup
Comments
I use all LD all the time. I know Kurt does not agree with me, b
I use all LD all the time. I know Kurt does not agree with me, but I get a killer sound using an LD in figure 8 inside the kick, or an RE20 in the hole with a TLM103 or KSM44 about 1 to 2 feet in front.
I solve the directionality problem by building a little house out of moving balnkets and foam.
Steve
I can only assume that in wanting a distant kick drum mike you'r
I can only assume that in wanting a distant kick drum mike you're lookin for the beef...might i suggest an ATM-25? this is what i use in conjunction with the close-mic at the head. this mike has a great range, is well damped and like cedar/kurt suggested a very tight pattern. This is not to be confused with the 'pro' series with the same number..these do not sound quite as distinct as the original.
The figure 8 in the kick that Steve uses sounds very interesting
The figure 8 in the kick that Steve uses sounds very interesting. Jumps RIGHT outta the mix at you. I asked if it was oriented at the shell or at the heads - he said it was pointed at the heads.
Doesn't really matter anyway, since you've got 2 omnis in there, you're going to get some shell resonance anyway. Depending on the mic, it could sound peaky or smooth. Steve's sounded smooth, I think it was a Shure KSM44.
If you're looking for a distant room mic, you could try a PZM mounted to a piece of lexan to increase the low-end. Placed low - below the cymbals about 8' away from the drums, you'll get a nice drum sound if the room sounds good. If not, tight mic.
The room mics are always fun to mult and send one channel to a ridiculous compressor and return that to it's own fader that you can work against the fader of the non or less squashed signal. Gets a nice blap.
Dan Roth
Otitis Media
Røde NT1000. Plenty low frequency candy. Relatively cheap.
Røde NT1000. Plenty low frequency candy. Relatively cheap.
Mats