lately while doing a mix, i routed drums to a group channel to control all the drums at once. this was no problem.

however i had placed some reverb through a send effect, not an insert on each channel but from effects send 1. different amounts for each instrument etc. this was no problem as well.

i was putting down drums to a finished 2 track mix that had a fade on the end. this couldn't be remixed because the owner didn't save the tracks.

as i faded out my drum group at the end the drums faded properly but the effects still ran through the master outs.

i wound up having to fade each track induvidually to acomplish this properly.

does anyone know how to route the effects in this situation, so that a group channel would have relative volume control of all the effects related to the instruments assigned to the group?

thanks

chris perra