What would be best to use to control the first reflections from my monitors if the ceiling is only 7ft 3in. I have some OC703 panels i'm putting above where the drum kit and percussion will be and i'm wondering if I should save some panels to control reflections above my mixing setup or if I should have some diffusion there.
Comments
AlTheBear wrote: What would be best to use to control the first
If you use 2" min of the 703 panels - with 2" min between them and the ceiling - the cloud will do you just fine.......
Rod
Diffusion is a super cool thing but you most of the time not on
Diffusion is a super cool thing but you most of the time not on first (early) reflections points. It is best to use in the back of the room if you are a good 6 or more feet from it.
Here is a little about diffusion and how it works.
http://www.rpginc.com/news/library/TechBullDiffCritList.pdf
Glenn
Thanks for the article Glenn. I've been wondering about some dif
Thanks for the article Glenn. I've been wondering about some different diffusor designs. I'm going to have some leftover lumber so i'm thinking why not recylce and turn the leftovers into diffusion.
heck yes, go for it. Glenn
heck yes, go for it.
Glenn
Diffusion question! I just got a hold of a bunch (hundreds) of w
Diffusion question!
I just got a hold of a bunch (hundreds) of wine corks. Could they be used as a helpful/functioning cloud diffusion above my mixing seat? I have a skyline diffusion wall behind me, but since I have the cork I'm thinking they could both absorb and diffuse? Thoughts?
Thanks, Manfred