Skip to main content

Anyone have any ground loop problems?

I'm getting an awful hum when I'm going out (affected or not) into a small 12" bass combo.

Any tips?

Tags

Comments

Boswell Mon, 10/16/2017 - 02:36

Which exact Sansamp model is it? Google brings up several possibilities, but not one that is definitively the model you describe.

What's the make and model of the amplifier?

Do you get the hum only when an instrument is plugged in?

Do both the RBI and the amp have ground connections via their respective mains cables to the same mains outlet?

Boswell Mon, 10/16/2017 - 08:41

OK, I found that one, although I wasn't sure whether there were major differences between the standard and the bass models. Either way, both the BA112 and the RPM take an IEC mains plug, so I assume that the chasses on both the them is mains earth.

With this type of dual-earthed arrangement, it becomes more important to power both units from the same mains outlet, usually by having a small mains socket board or (better) a Y-shaped dual mains lead. This ensures adequate earth bonding, assuming your wall outlets are well earthed.

The final link is the bass guitar itself. It would be useful to know whether you get the hum (a) with no guitar plugged in, (b) with the guitar plugged in but placed in a stand, or (c) only when playing it with fingers touching the strings. If it's (a), then does the volume control on the RPM or the BA112 make any difference to the audible hum level?

x