Your Avatar Submitted by Digitalien1 on Thu, 11/20/2014 - 04:19 Does anyone know if I can change a knob in the Smart Controls window into an on/off toggle switch? I want to use it for capture in InPhase and learn for X-Noise. Tags logic pro Log in or register to post comments Comments Your Avatar anonymous Not a Logic guy. Have you tried watching any of these to see if Not a Logic guy. Have you tried watching any of these to see if they may answer your question? [=" "]View: [/]=" "]View: [/] [[url=http://=" "]View: [/]=" "]View: [/] Log in or register to post comments Thu, 11/20/2014 - 07:59 Permalink Your Avatar Digitalien1 Nothing there, but thanks for replying! Nothing there, but thanks for replying! Log in or register to post comments Fri, 11/21/2014 - 06:12 Permalink Your Avatar gdoubleyou I haven't experimented much with smart controls, but you should I haven't experimented much with smart controls, but you should be able gain control over all parameters, via the Parameter Mapping settings. Log in or register to post comments Sat, 11/22/2014 - 10:02 Permalink
Your Avatar anonymous Not a Logic guy. Have you tried watching any of these to see if Not a Logic guy. Have you tried watching any of these to see if they may answer your question? [=" "]View: [/]=" "]View: [/] [[url=http://=" "]View: [/]=" "]View: [/] Log in or register to post comments Thu, 11/20/2014 - 07:59 Permalink
Your Avatar Digitalien1 Nothing there, but thanks for replying! Nothing there, but thanks for replying! Log in or register to post comments Fri, 11/21/2014 - 06:12 Permalink
Your Avatar gdoubleyou I haven't experimented much with smart controls, but you should I haven't experimented much with smart controls, but you should be able gain control over all parameters, via the Parameter Mapping settings. Log in or register to post comments Sat, 11/22/2014 - 10:02 Permalink
Comments
Not a Logic guy. Have you tried watching any of these to see if
Not a Logic guy.
Have you tried watching any of these to see if they may answer your question?
[="
"]View:
[/]="
"]View:
[/]
[[url=http://="
"]View:
[/]="
"]View:
[/]
Nothing there, but thanks for replying!
Nothing there, but thanks for replying!
I haven't experimented much with smart controls, but you should
I haven't experimented much with smart controls, but you should be able gain control over all parameters, via the Parameter Mapping settings.