Im unsure of these cables i made for connecting balanced outputs of my mixer(TRS) to my crown power amp in(XLR).
I wired them this way:
pin1=TRS ground
pin2=TRS tip
pin3=TRS sleeve
It works but i know from experience that just because something works doesn't always mean it's correct or not risky.
I googled it but i have a hard time understanding the different TRS to XLR wireing schemes.
Thanks for reading and any confirmation.
Comments
TRS=Tip Ring Sleeve. You should go to the Crown website and dow
TRS=Tip Ring Sleeve.
You should go to the Crown website and download the specs and do the same with the mixer. In the US generally Pin 2 is (+)=tip, Pin 3 is(-)=ring and Pin 1=sleeve (common).
[[url=http://[/URL]="http://en.wikipedia…"]XLR connector - Wikipedia, the free encyclopedia[/]="http://en.wikipedia…"]XLR connector - Wikipedia, the free encyclopedia[/]
OK i finally confirmed it on google.It is correct but i said (gr
OK i finally confirmed it on google.It is correct but i said (ground/tip/sleeve) intead of tip/ring/sleeve) so you see why i always have to Double Check my work.lol