So I have a Yamaha EMX5014C mixer. I have it plugged into my computer to record into MixCraft6. I can record, but when all my levels are up, (the recording level on MixCraft is up, the volume is up on MixCraft, the volume is up on my computer speakers, the gain and compression are both all the way up on the mixer), I still have a very low and distorted recording.
Hey thanks in advance for helping me it will be very appreciated!
About to hook up my friend's recently purchased equipment and went to Guitar Center this morning to get the interconnect cables.
I am hooking up starting from top to bottom:
Numark Mixer into
Peavey EQ into
Rane AC22 Xover into
Crown MT1200 for bass and MT600 for mids and highs
Im unsure of these cables i made for connecting balanced outputs of my mixer(TRS) to my crown power amp in(XLR).
I wired them this way:
pin1=TRS ground
pin2=TRS tip
pin3=TRS sleeve
It works but i know from experience that just because something works doesn't always mean it's correct or not risky.
For years i've been ghetto rigging ways to record. I want to know what the proper way to record is. Here is how I plan on setting up my gear once i have drum mics.
I have a Behringer PMP 3000 Europower mixer, A mobilePre-USB interface. And a crap ton of Audix om2 mics and a Shure SM58.
Tip, Sleeve (TS) refers to a type of 1/4" phone plug that is used for unbalanced connection.
1) going from "Realistic" Stereo Audio Selector - RCA Outs (not sure if balanced or unbalanced outs, cheapo from radioshack)
2) to BEHRH(*&$&($ Truth B2031A monitors - can accept XLR balanced or 1/4TRS unbalanced
What kind of cable would I want to buy?
Thanks!
Hi! Okay I have a Firepod and a TC M300 that I want to use as External FX in Cubase! I hooked up the M300 Via SPDIF to my Firepod. I've tried the set the External FX Send and Return track in Cubase but I don't think I did it fine.
When I Insert the M300, there's no more audio playing on the track or it plays but completely DRY.
Has there been a poll taken on which sample rate is most common among the forum users?
I wasn't able to create a poll for the topic...maybe someone more familiar with how to do that would make one
I rock a PV14 mixer (among other junk) with both stereo and/or mono outs. I currently monitor either through headphones, or occasionally through a pair of 2 little Kustom (i know, go f- yourself) passive monitors powered by a Crate power block amp (hell of deal)...this rig works, but is obviously not giving me a great sound.
