Hello guys!
I've just bought a second hand pair of 520 Active and swapped a tweeter. Everything works fine except one thing: One of them has a clear,non distorted <100hz response and the other one sounds like something touches the cone( even though this is not happening ).
I've opened the box to replace the tweeter and arranged all the cables in such way the airflow is not affected.
Switched the inputs between them, same result
What do you think? Is the amp damaged?
I'll post a recording to show you exactly what I mean.
M1active - YouTube
As you can see, the first monitor has a higher gain setting than the other one, to reveal the difference
Thanks and looking forward to hear your opinions,
Adi
Comments
sounds like a blown speaker to me, maybe something in the voice
sounds like a blown speaker to me, maybe something in the voice coil is gone? i'm not an expert, if it were me, i'd swap the speakers, and see if it does the same thing. that'll help tell ya if it's the drivers or the amp. then take it from there.
kmetal, post: 408150 wrote: sounds like a blown speaker to me, m
I'll swap them now to see if there is any difference and I'll let you know.
Any other ideas are greatly appreciated!
I think it's the woofer, I've swapped them and the issue persist
I think it's the woofer, I've swapped them and the issue persisted. The excursion is clean, nothing touches anything inside. It simply resonates that unwanted sound
The last time I came across a problem like this I found it was t
The last time I came across a problem like this I found it was the woofer magnet that had slipped by a few thou such that the voice coil was now catching against it. It turned out on persistent questioning that the loudspeaker owner had lent the speakers to a friend, and the friend had dropped one of them. There was no visible damage, and he didn't think to test them afterwards, but had given them back without telling the owner about the accident.
Boswell, post: 408159 wrote: The last time I came across a probl
They don't seem to be dropped, the cabinets look clean.
Then it is a condensator in the splitter that is gone.
Then it is a condensator in the splitter that is gone.
Claudia, post: 408175 wrote: Then it is a condensator in the spl
I've swapped the cabinets(amplifiers implicitly) and the issue persisted on that specific woofer.
Its excursion,as I said,is clean. When the woofer has a cold start, it doesn't make that sound. After cranking it 2-3 seconds it starts buzzing. I assume something inside the core resonates, there is nothing outside that might affect its travel.
If I pull the woofer out of the cabinet, it sounds fine; When it's inside and tries to move/compress air it starts making that noise.:mad:
did you try putting the working woofer in the cab that's giving
did you try putting the working woofer in the cab that's giving you a problem?
kmetal, post: 408182 wrote: did you try putting the working woof
Yes, I'm using the working woofer in the cab of the faulty one at this moment.
chypp, post: 408199 wrote: Yes, I'm using the working woofer in
And nothing in the cabinet is loose or coold viberate against the conus?
if the faulty woofer is faulty in the other cab, and the good wo
if the faulty woofer is faulty in the other cab, and the good woofer is fine in the one that was difstoring, it's a pretty safe bet that it's just a woofer. if it were me, i'd order a new woofer, and take it from there. it it seems to me like we narrowed it down.
BTW your new woofer is going to take like a week straight at 90db of playing music thru it constantly to break in. i wouldn't start mixing on them until it's broken in.