For real. I've already been through this one before, and now I am the proud owner of an API 3124+. I bought it so I would have more than one pre by API.
But nothing is different between them.
Other than the obvious stuff. Price, rackmount, look.
Glad it's working out well...One thing you need to try is to pad the outputs (Shure inline pads or the A-designs ATTY), which will then allow you to crank the gain more without using the pad on the API. I did that on overheads a lot and it sound really good. The API has really hot levels coming out.
I'm trying like hell to get an API 3124+. Could I use my Allen & Heath mixer to pad the api pre's. Any API pre users care to elaborate on the sound compared to say a Great River MP2NV? Anyone know of a 3124 up for grabs?
I noticed in one of your other posts that you've got a couple of Sebatron units as well as the API.. I know it's not really apples and apples but on a scale of 1 to 50 (just to give a bit of headroom ;-)) where would you place the Sebatron 2000/4000e, Thorax and API as mic pre-amps in terms of the sound you can achieve for a variety of applications?
Being Aussie and loving up my Rode mics, I'm keen to go for an all-Aussie vocal chain :lol: .. but I don't really want to sacrifice quality if I'm going to spend >$1.5k USD.
On a side note.. anyone reading this know of any studios in Sydney or Perth (I spend alot of time in both places) packing a Sebatron pre?
I noticed in one of your other posts that you've got a couple of Sebatron units as well as the API.. Matt
Sorry Matt, I only have an API3124+ at the moment. Most likely I will have a Sebatron or 2 by the end of the year. If not sooner. They are real high up on the list now adays.
yeah, I'd love to hear the differences between the Seb 4000 and the API 3124. Again they are apples and mangos but I'd like to a/b them. Those are the two units I'm looking at the most but I've got to tell ya I'm still sceptical about the Seb stuff. Anyone in the Central Tx area have one they wanna compare with my MP2NV? Right now the set up I'm going for is the MP2NV, a UA 2-610 and the API 3124, perhaps a nice clean pre after that, Grace, Earthworks etc.
Comments
Price, that's it! For real. I've already been through this one b
Price, that's it!
For real. I've already been through this one before, and now I am the proud owner of an API 3124+. I bought it so I would have more than one pre by API.
But nothing is different between them.
Other than the obvious stuff. Price, rackmount, look.
Do you use it with either the API compressors or EQ's?
Do you use it with either the API compressors or EQ's?
No, the only piece I have is the API 3124+
No, the only piece I have is the API 3124+
I recently sold my API 3124. :cry: That thing was sweet!
I recently sold my API 3124. :cry:
That thing was sweet!
And I recently bought it.. Yes it is!
And I recently bought it.. Yes it is!
Glad it's working out well...One thing you need to try is to pad
Glad it's working out well...One thing you need to try is to pad the outputs (Shure inline pads or the A-designs ATTY), which will then allow you to crank the gain more without using the pad on the API. I did that on overheads a lot and it sound really good. The API has really hot levels coming out.
:D
I'm trying like hell to get an API 3124+. Could I use my Allen
I'm trying like hell to get an API 3124+. Could I use my Allen & Heath mixer to pad the api pre's. Any API pre users care to elaborate on the sound compared to say a Great River MP2NV? Anyone know of a 3124 up for grabs?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7323507396&rd
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7323507396&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1
There is one on eBay, but the seller only has like 27 feedbacks - so BEWARE!
Also a few 512C's and 550b's as well...
:cool:
hey Stu! I noticed in one of your other posts that you've got
hey Stu!
I noticed in one of your other posts that you've got a couple of Sebatron units as well as the API.. I know it's not really apples and apples but on a scale of 1 to 50 (just to give a bit of headroom ;-)) where would you place the Sebatron 2000/4000e, Thorax and API as mic pre-amps in terms of the sound you can achieve for a variety of applications?
Being Aussie and loving up my Rode mics, I'm keen to go for an all-Aussie vocal chain :lol: .. but I don't really want to sacrifice quality if I'm going to spend >$1.5k USD.
On a side note.. anyone reading this know of any studios in Sydney or Perth (I spend alot of time in both places) packing a Sebatron pre?
Cheers people.
Matt
API, but no Sebatron Matt_Trix wrote: hey Stu! I noticed in on
API, but no Sebatron
Sorry Matt, I only have an API3124+ at the moment. Most likely I will have a Sebatron or 2 by the end of the year. If not sooner. They are real high up on the list now adays.
Best reguards
Stu, aka
Luke :lol: whatever
yeah, I'd love to hear the differences between the Seb 4000 and
yeah, I'd love to hear the differences between the Seb 4000 and the API 3124. Again they are apples and mangos but I'd like to a/b them. Those are the two units I'm looking at the most but I've got to tell ya I'm still sceptical about the Seb stuff. Anyone in the Central Tx area have one they wanna compare with my MP2NV? Right now the set up I'm going for is the MP2NV, a UA 2-610 and the API 3124, perhaps a nice clean pre after that, Grace, Earthworks etc.
Sweet.............