Skip to main content

when ever i record my amp when it's distorted is sounds REALLY harsh. i dont know why...but it may be cause by set up.

for starters I'm using Shure pg-48 to mic my amp, which isent the best mic for recording instruments.

then that goes straight into my echo mona to my pc.

I NEED HELP!

Comments

anonymous Thu, 08/18/2005 - 03:39

Don't use that mic.

Get two Shure SM57's or equivalent.

Mic one right on the grill about halfway between the cone and the outer edge of the speaker.

Mic one behind the amp aimed at the back of the cabinet.

Mix them together to taste.

Alternate is to put the second mic 2-4 feet in front of the amp and aimed at it (but this may pick up too much room sound and make the mix less defined).

jonnyc Thu, 08/18/2005 - 11:04

Listen to these guys turning down the distortion is gonna give you a better recorded sound even if its not what your ears like to hear. I have this argument all the time with guitar players so I've just gotten to the point where I have them set there head up in the control room and then run a cable into the tracking room I tell them to dial in their sound and when they go into the recording room to track I crank the gain down about 25%, never had one complaint and the guitar sounds are much improved. Although upgrading to a good mic and pre also helped and will in your case for sure.

x

User login