i think you're only sending 1 side of the signal out.. does the v-amp2 have a stereo unbalanced output or separate left and right outputs?
if stereo, then use it, just make sure your cable is TRS. if not, get an adapter

twon

The only outputs the V-amp has are: Left and Right line-out, and headphones. What kind of adapter do I need?

Thanks,

Lane

what sound card are you using?

it sounds like your sound card has a stereo 1/4" that you are only using one side of.

for this you want dual female 1/4" (unbalanced) to stereo 1/4" (also unbalanced)

but before you buy anything, make sure that the signal isnt hard panned in guitar tracks pro. it could be hard panned left but your effects are panned center

twon

I have a SoundBlaster Live! 5.1 sound card. The thing is, no matter what I plug into the line-in(guitar, amp, V-amp), I only hear sound through the left channel. Ive checked the balance in the volume control, and its right in the middle. What do you mean by "hard-panned"? The track pan control in Guitar tracks isn't adjusted to the left, if thats what you mean.

Thanks,

Lane

Hi,

It seems that you are trying to plug mono out from Vamp into stereo (trs) of S.Blaster.

a) Try to plug in just half of that mono jack (you will find the „knee“)
b) Change the recording input properties of your DAW (select In L or In R, not the stereo in)

Regards