Submitted by metalmikey
on Fri, 12/17/2004 - 04:50
Hello. I own an M-Box and I'm running PT 5.3. Im trying to figure out how come my recording volume level is so low. It doesn't even break the midway mark. Anyone else had this problem?
Are you mixing reference levels by sending a -10 source to the +4 inputs of the Mbox? Take a look at your "Hardware Setup" in the "Setup" menu and adjust it to match your source signal. Good luck!
Hello. I am running a codenser mic straight to my mbox. i have the input level on the mbox set to three quarters and did some adjusting in PT. still having problems with getting the levels above midway.
Plug into another channel - If nothing, plug another mic in - If nothing, change cables - If nothing... Uh... Play louder? Turn the mic around? You got me...
Comments
Member for
22 years 7 monthsTell us everything that you are doing and all gear you are using
Tell us everything that you are doing and all gear you are using during recording and we can probably help.
Member for
24 years 4 monthsHi Mike, Are you mixing reference levels by sending a -10 sour
Hi Mike,
Are you mixing reference levels by sending a -10 source to the +4 inputs of the Mbox? Take a look at your "Hardware Setup" in the "Setup" menu and adjust it to match your source signal. Good luck!
Member for
20 years 6 monthsHello. I am running a codenser mic straight to my mbox. i have t
Hello. I am running a codenser mic straight to my mbox. i have the input level on the mbox set to three quarters and did some adjusting in PT. still having problems with getting the levels above midway.
Member for
22 years 7 monthsWhich mic is it? Do you have the source button set to 'mic'?
Which mic is it? Do you have the source button set to 'mic'?
Member for
20 years 6 monthsMXL 2001 and Yes, i have it set to Mic. I even have the playback
MXL 2001 and Yes, i have it set to Mic. I even have the playback knob turned all the way to input.
Member for
20 years 6 monthsAny suggestions?
Any suggestions?
Member for
24 years 4 monthsu got phantom power? dunno if thats on the mbox... but most cond
u got phantom power?
dunno if thats on the mbox... but most condensers need phantom power
Member for
20 years 6 monthsPlug into another channel - If nothing, plug another mic in - If
Plug into another channel - If nothing, plug another mic in - If nothing, change cables - If nothing... Uh... Play louder? Turn the mic around? You got me...