Hi David.
Well I followed your instructions, but I may be doing something wrong.
I noticed that there is a small red signal that co responds with the relative key strike. I placed my first file there and edited the left and right points as you instructed. But when I dragged and dropped my next chromatic note file onto the next key position and did the same, strange things happened. 1: the second note wouldn't play. 2: if it did it was way out of pitch.
I have Nemesys Megapiano multi samples which load fine.
I have always wanted to be able to load other multi sample sets, particularly Rhodes. But I just can't seem to get there. Any suggests ?
cheers, speakeasy
Comments
Reply 3 to david French / Kontact samples Yes I thought the sam
Reply 3 to david French / Kontact samples
Yes I thought the sampled note was the correct pitch but I'll try again.
The main problem is that when I load and stretch the 2 nd sample note it doesn't play. The sample notes I have are all ones I freely downloaded. Most of them do not offer every chromatic note, and I'm having a bit of trouble when I choose a note that's an octave too high or low if you nkow what I mean ? ...I'll keep trying. Thanks David
Perhaps the second sample is not the same pitch as the key you m
Perhaps the second sample is not the same pitch as the key you mapped it to? You do have each note sampled, right?
As for volume, make sure that your blue region stretches from bottom to top. If it does, then any velocity on that pitch will trigger it.