I'm recording drum tracks over the next few weeks. It used to work fine, now one of my condenser mics likes to dip in power while recording. For example, the right comes through just fine with an even frequency, the left comes through, but the frequency drops in size/volume for a few seconds, then returns.
Hi,All
I am not sure understand how to set up the inputs and outputs from the E-mu 1820m in to reaper.This is the problem.I just updated to the latest version of patchmix.I do not have any sessions saved in patchmix as of yet.So I can not go back to the old session in patchmix to were my setting were working for me with Reaper great.
I have Windows XP Media Edition on a Sony VAIO Pentium Duo Core. I have my E-MU 1820M installed and until recently, have not had a problem. In the past few weeks my sound cuts out for about 1-2 seconds at random times. It also pops and skips a second or a half during playback sometimes.
Hey Guys,
First of all i've read most relevant threads about these two products but still needed clarification...
Ok, Im in a jam and need some assistance. I run a 3.2ghz pentium 4 with 1gb ram and a emu 1820m card and audio dock. I have had this installed with no problems since this card has come out, routinely updating the software when it is available.
was wondering if anyone had opinions on the quality of pre's in these two interfaces. i need a new interface and have my eye on either of these two but cant decide, any help would be appreciated :)
Hey, i don't know if this is the best forum to ask this in, but it's the weekend and i can't call emu tech support.
I am using the SPDIF out on my PreSonus Eureka to my EMU1820M SPDIF in. My host is set for 44Khz and my Eureka is set for the same. I am getting a low level crackle on my audio. If I set the Eureka to 88KHz it goes away but the tone suffers a tad.
Does anyone know If I need to use the BNC world clock to sync the EUreka to the EMUs 44Khz?
Thanks
Hello ?
How are you doing? Can I ask you a question about how to set up the pan during audio recording. I'm more a composer then a engineer and I'm having some problems to setup some new gear. Somehow I'm loosing sound in the centre of the sound spectrum.
Can you tell me of my sound-chain is setup right for panning.
I have heard very good things about the E-MU 1820m and am seriously thinking about buying it. My PC meets all the system requirements, my processor is 2.70 GHz but it is a celeron processor. Someone else mentioned that there might be a compatibility issue between celeron processor and this soundcard. Does anyone have experience or heard about this?
