behringer xenyx mixers

I record a podcast and I recently got the Behringer xenyx x1222usb to record myself and some friends. I plug the board into my PC, using Adobe Audition.

Hi I’m new to the site and fairly new to recording. I use a Behringer x2442USB mixer and Cubase running on my HP Laptop. Originally I connected the mixer to the computer though USB ports for input and output form the laptop was via the headphone jack leading back to the mixer. When I would turn up the volume a bit on the mixer I would get an irritating whining sound.

I'm using Behringer x2442usb and Studio One DAW.

I can't seem to record an audio track through the mixer adn monitor the previously recorded tracks at the same time.

Anyone have a suggestion?

While this is very good mixer for vocals recording on DAW then models before 2009 package update "Now with Phantom Power" lack phantom power for condenser mics on XLR connector.

DISCLAIMER:
- If you don't know how to open the mixer or know how to solder then STOP and find a new hobby. I am not responsible if you get electric shock or burn your house etc.

Simple question really. But I don't know the answer.

I want to connect my monitors to my mixer, but I don't know which cables to use.

hi. ive been recording vocals for years simply plugging in my microphone to the back of my sound cards input. crude perhaps but it has worked mostly fine. I'm somewhat aware that having a mixer/preamp is supposed to enhance your signal or clear it up somewhat (i think, right?) so recently i picked up one of these xenyx 502s. it hisses. it sucks.

Hi everyone! I've been pulling my hair out for hours trying to get a good radio/podcast sound from a Behringer Xenyx 802/1002 (I own both) going into a Zoom h4n. (I'm using a Heil PR40 XLR to the Behringer.)

Yes... I am very much a noob at studio setups/equipment routing. I'd like to know what cables I need to start recording on my PC.

The Equipment i am currently using is

Behringer Xenyx 1002 Mixer

CAD PRO-7 7-Piece Drum Microphone Pack

I'm using a Behringer Mixer Xenyx 1222FX. I have to connect the Main Outputs of the mixer to the unbalanced line-in of a Dolby stereo amplifier which uses 2 RCA connectors. In order to make the correct wirings (balanced XLR -> unbalanced RCA), I have to know if the output stage of the mixer uses:
transformers,