cue

Hi! In reference to this thread ...

A monitor system used to generate the musicians' headphone mix. Basically, the cue send on the console feeds an amplifier, which in turn provides a signal source for the headphones.

Hi,

Hello All,

Up to now, I've been communicating with the tracking room via the PHONES socket on my Behringer Eurorack MX2642A http://www.Behringe…

Session starting in a couple hours. But my monitor mixer 1604VLZpro has developed a nasty problem. It's as though there may be a cold solder or dirty connection somewhere across the mix L/R bus. The right channel goes away completely and left is very low in level. But a loud plosive sound though a mic will bring both channels back to full level.

I'm using Nuendo on WinMe. When I put a chnnel into ready record and the channel switches to input the cuemix fader and pan move around by themselves which means I cant use direct monitoring.

Anyone else had this problem & how is it fixed.

Thanks in advance :confused:

Are there any special considerations for building cue boxes for studio use handling up to 20 pairs of T-20s.



Also any special considerations for an amplifier for the same.



thanks



eli

Hi Dedric,

I am two weeks deep into my new Paris system and am loving the sonic experience. Thanks for your helpful comments and suggestions.