eqing

Hey all,

Here's one for the more experienced engineers and home studio veterans: tell me if there's anything wrong in how I'm EQing my bass parts. So, I use an e906 (in neutral, which is really just an e609) to mic the bass cab.

I am guessing that hardware compression, limiting and EQing at the mastering level will yield much better results than software, especially garageband. Are there any good hardware compressors, limiters and EQs that won't break my wallet?

I have a couple questions for some gurus out there.



First of all, what is the best way to mix two guitar tracks when they are both playing melodic lines (a la Killswitch Engage, Trivium etc)



Should they be panned to the extreme left and right or maybe halfway, or between half and extreme?

I've just started using Kontakt for MIDIs. In regard to the samples it comes with, how should I treat them when mixing?



Do they need the same EQ treatment as normal audio files? In other words, should I treat my Kontakt sample bass guitar as if it were any other audio track-recorded bass guitar?

It is often talked about the Yin and Yang of EQing (eg. Bob Katz in his book): Boosting a frequency has the same effect as attenuating another frequency in another range.

I'm recording a guy who plays acoustic guitar and sings along. He's using an Ibanez PF5ecent acoustic electric that is plugged straight into my E-MU 1820m. Open chords sound fine and extremely round and perfect. When he plays power chords all I can hear is the god awful fret buzz. How should I tackle this problem, we can rerecord if need be.

When checking commercial songs (in 44.1 kHz) with a spectrum analyser, I often see a sharp roll off in frequencies at around 20 kHz or so. Why exactly is this done? In order to make the fact that the frequencies are abrubtly cut off at 22050 Hz inaudible? So is this something I should be reproducing by using a low-pass filter with a sharp Q (I'm using 20504 Hz, Q of 5.79)?

I recorded acoustic guitars for a song that had just guitars and vocals. A very nice simple melody. In stereo, AB spaced pair. (one at the bridge, anled a little down, the other at bout the 10th fret)

Hey All,



just wondering what different approaches people take to eqing drum overheads, or, how people make their overheads work well with their close mic's.





Thanks,



Sammyg