phone

Patching a phone into a Mackie board in V/O booth

Submitted by RickA on Mon, 03/20/2017 - 11:04

Hi, all! I'm a tech-challenged home voice-over guy. I have a Mackie board in the booth with me, but the phantom power for my mic actually comes from a separate Grace Design mic preamp outside. For "old school" phone patch, is there a way to connect either a corded phone directly, or via a Gentner MicroTel box, into the Mackie mixer for two way phone conversation with a client?

Help, My Monitors are picking up cell phone signals and other signals?

Submitted by WinnipegSoundGuy on Mon, 03/17/2014 - 13:16

Help,

My Monitors are not only picking up cell phone signals and making a "crackling sound" but must also be picking up other signals as the nasty crackling noises come right out of the blue, even when the cell phone is not on.

Using phone to record gig for social media, mic overloaded

Submitted by John Allsopp on Wed, 07/11/2012 - 00:44

I'm new here. I'm an Internet marketer, and one of the things I do is gig and festival promotion in a social media style, ie. hand-held, and as 'live' as possible. To do 'live' video snippets through the day I use a Samsung Galaxy S2 phone (Android).

Recording Phone Service Vocals

Submitted by Dan Theman on Tue, 03/08/2011 - 07:32

Ok, so here is the deal.

I am recording the voice for a companies Phone Messaging System, their phone company is telling me that the recording needs to be in CCITT u-law, 8.000khz, 8 Bit, Mono format. I am using Cubase 5 to record and i have tried this:

Cell phone pulse interference issue

Submitted by anonymous on Sat, 02/13/2010 - 20:53

Some friends of mine went to that Mercedes Benz Fashion Week being held at Bryant Park in NYC this week to do some field recording with a video camera. The footage was loaded into Adobe Premiere Pro for editing and I noticed that cell phone pulses were recorded on the audio portion of the video.

recording for VoIP phone systems

Submitted by anonymous on Tue, 04/28/2009 - 21:03

I'm recording messages to be used on a VoIP system. Due to software contraints of the phone system, the finished files must conform to CCITT u-Law, 8.000 kHz, 7kb/sec. Bad for the stereo but good for a phone.

The files play back fine within the quality constraints and the voice sounds ok over a phone, but silence is not silent. It sounds like static, white noise.

Clean up noisy phone conversation

Submitted by Blueraven on Fri, 12/14/2007 - 16:29

I have Samplitude but havent got to deep into it yet.

Is there a way to do this in Samplitude?

If so can you explain it fairly easily?

Thanks

A [i]REALLY[/i] unhappy phone call.

Submitted by anonymous on Sun, 11/26/2006 - 10:59

Request Help: Symetrix TI-101 Phone Patch integration/usage

Submitted by anonymous on Sun, 02/20/2005 - 11:25

Hope I am posting this in the correct forum...

I'm trying to get a Symetrix TI-101 phone patch working. My biggest problem...

I use a line splitter to take the phone line into the Symetrix. The other side of the splitter goes to the telephone. To open the phone line, I have to take the handset off the telephone base.

reverb in head phone mix help

Submitted by anonymous on Tue, 10/19/2004 - 13:59

I have a Tascam US-122 USB Audio Interface. It has 2 mike inputs and two inserts and direct monitoring. I am using Adobe Audition. Is there anyway i can send reverb from Adobe into my Tascam so i can hear it in my head phones while actually recording. I dont want it to record the wet signal just dry. Help! What do i need to be able to do this.