A client of mine recently purchased a AW4416, and now wants to know whether it will support OMF in the near future. (Buy first, ask questions later, right? :roll: ) So, I thought I'd ask about it here. Also, any general comments or observations about the device would be appreciated.
Thanks in advance,
Tags
Comments
OMF in a 'all-in-one' box?? I seriously doubt it, though they a
OMF in a 'all-in-one' box?? I seriously doubt it, though they are getting better and better.....OMF seems to me to be suited better in a dedicated DAW that has fully featured EDL editing capability. Does the Yamaha or any other wonder-box have such OMF ability? That is if it works like it should in the first place... :D
I have a aw4416 in my school but no one has used it at all. ever
I have a aw4416 in my school but no one has
used it at all. everyone uses Nuendo or
Cool Edit or Soundforge for all that job.
it is quite sad because I know it is good
multitable.
Can you give me details how it could be used.
like for example multitrack portable recording system with compressor, limiter and
2 effect in one box plus burn it and give it to client. any other ideas? its really now
not in use because there is no idea how to
use it.
OK, I found out what OMF is. No, AFAIK they have no plans to sup
OK, I found out what OMF is. No, AFAIK they have no plans to support it in the near future, and I can't see why they ever would.
In the newest OS, they did include an "export wave file" (to CD-r) feature, but it takes longer to export a file than the actual length of the file. It's easier just to put in the expansion cards (adat or whatever) and dump things that way: you can dump 16 tracks via adat in the time it takes to play back your song, plus whatever time it takes to set up.
Hyeena, I think somebody has to read the manual ;) . If they are happy with Nuendo, I can see why they might not bother with the 4416. I got it because I was tired of fighting the computer all the time, but now I also have a fairly stable computer (PC) thanks to RME's hammerfall and also their suggestions for a music-PC. I am using the 4416 mainly as a mixer right now, connected to two computers by adat (one running Cubase, which I use for midi, and another running Reaktor). I can process with Waves and other plugins in Cubase, and then dump to the 4416 for mixing. As a mixer, it certainly is much more reliable and easier to use than a virtual mixer on a PC, and as far as I can tell it sounds better than Cubase, at least. I'm not sure about the dynamics and the EQ--I can tell that they do something, but I have yet to find anything that makes me say "hey, that sounds good!" My plans are to build up my front end, though, to get the best possible sound before converting.
Thanks Patrick. The reasons OMF would be preferred over ADAT or
Thanks Patrick.
The reasons OMF would be preferred over ADAT or other such transfer would be reliability and convenience - time notwithstanding. Also I'd much rather toss in a cd than have him schlep the whole thing into the studio. But I guess those are the only options for now. Oh well.
One of the items I teched at Sweetwater was the AW4416..it's a g
One of the items I teched at Sweetwater was the AW4416..it's a great unit if you dont have a computer system and you'd like to take it to other people's houses and so forth. The unit itself takes some time to understand how it works with all the layers and the inputs versus the monitor section. I dont think that Yamaha will ever impliment OMF since that would deal with a serious OS revision as well as needing a larger drive possibly!!If anything you could get the expansion slots for it and send it out digitally to a DAW machine for serious editing capabilities.
If anyone has any specific questions they would like to ask,,I'll try and answer them the best I can. I know the unit pretty well(even helped mr Born on the Bayou with it!!)
Opus
Old thread, but I thought I'd post it for anyone interested...
Old thread, but I thought I'd post it for anyone interested...
I own two and use them in my commercial studio on a daily basis. According to some at Yamaha, I was the first to digitally cascade and sync two of them. I probably have one of (if not THE) most maxed out, tricked out AW system in the world... Waves Y56K card, lightpipe cards to computer DAW, extra HDD's... etc. I've written a few articles about them, beta tested software releases and the Y56K card and am a fairly good source if you have any questions - operationally or from a potential buyer standpoint.
Any questions, just give a shout! :)
Patrick, a few suggestions and thoughts for you: If you have no
Patrick, a few suggestions and thoughts for you:
If you have not done so already, you NEED to upgrade to OS 2.0 on the AW. In addition to several bug fixes and other goodies, it gives the AW complete MIDI CC capabilities - now you can REALLY use that 4416 with your computer DAW because you can use the AW's faders to control the DAW's onscreen faders, etc.
As you've already noticed, having a dedicated control surface is a big plus over mixing with a mouse - at least to most people. I'm in agreement with Opus - for many people a device like the 4416 is a great alternative to a computer based recording setup. But since each of these two systems has weaknesses that the other corrects, the pairing of them makes for a GREAT setup.
Take the 4416 out for remote recording sessions. Bad acoustics at home but great ones in a friends house / church / warehouse / whatever? Want a REAL acoustic piano but don't own one? Take the recorder to the piano. Take the AW and do some tracking over there - where ever "there" is. You're not a slave to one acoustical environment with a portable device like this. sure, you can take the computer, but it is much more of a hassle.
Want to use the AW as a "front end" for your DAW? No problem. The preamps, while a little shy in the gain department, sound pretty good in a "neutral" sort of way, and the A/D converters are surprisingly good (much better than the 02R converters IMO). The two onboard effects processors (not to mention the available Waves Y56K card) and the AW's onboard EQ and dynamics processors can take some of the load off your CPU...
...and that CPU is still nice to have! NO stand alone DAW is going to come anywhere near to a computer insofar as editing and functions of that nature. So use the DAW for that... and for additional computer based plug ins and for more tracks. Remember, the AW has a 16 track (128 virtual track) 24 bit / 44.1 - 48 KHz non-data compressed HDR on board, but the mixer maxes out at 44 channels... Four of those are for the onboard stereo efx returns, sixteen for the disk playback tracks, leaving you with 24 more - if you asign 8 from the analog inputs, that still leaves 16 from the option card slots or whatever (although I can honestly say they could have left the sample pads off an I'd not miss them a bit)... Stick a pair of lightpipe cards in and you can fly all 16 tracks into your DAW in real time for editing. Or you can fly 16 tracks OUT of your DAW into the AW for mixing.
At least for me, having the two systems together has been a much better way to go than having either one alone would have been.
Best of luck, and let me know if you have any specific questions I can help with.
I'm a farmer diversifying into music, setting up a studio and I
I'm a farmer diversifying into music, setting up a studio and I need advice...AW4416 or VS2480?
I play stringed things, will be recording native acoustic instruments, voices, synths, samples and MIDI stuff. Since I'm almost new to the whole scene, accessibility & ease of use are key. Also on the kit list are iBook + Logic (& Reason?)& outboard fx. Any voices out there to guide me thro' the wilderness?
Farmer, for me, it came down to the audio quality, and Roland is
Farmer, for me, it came down to the audio quality, and Roland is still using data compression on the VS2480. Sure, you can run up to 16 tracks WITHOUT compression, but if you want the higher sample rate or 24 tracks, you're stuck with data compression - and I can hear that. For acoustic instruments, the AW is great. The Roland only beats the AW in one area IMO - and that is onboard editing. It's a bit easier and more powerful than the AW's. But that's what computers are for - editing on a computer is going to be easier / better more powerful than on any stand alone type unit, and interfacing the AW to a computer DAW is easy and very powerful.
As far as Logic goes, I've been using their software since before their WAS an Emagic (back when they were called C-Lab). I love it, but it's definitely NOT something I'd recommend to someone who is just starting out. The learning curve for that software is pretty steep.
Originally posted by Phil O'Keefe: Farmer, for me, it came down
Originally posted by Phil O'Keefe:
Farmer, for me, it came down to the audio quality, and Roland is still using data compression on the VS2480. Sure, you can run up to 16 tracks WITHOUT compression, but if you want the higher sample rate or 24 tracks, you're stuck with data compression - and I can hear that. And the Roland is considerably more expensive. For acoustic instruments, the AW is great. The Roland only beats the AW in one area IMO - and that is onboard editing. It's a bit easier and more powerful than the AW's. But that's what computers are for - editing on a computer is going to be easier / better / more powerful than on any stand alone type unit, and interfacing the AW to a computer DAW is easy and very powerful.
As far as Logic goes, I've been using their software since before their WAS an Emagic (back when they were called C-Lab). I love it, but it's definitely NOT something I'd recommend to someone who is just starting out. The learning curve for that software is pretty steep.
Phil, Your posts are really informative. I had a question. I
Phil,
Your posts are really informative. I had a question. I am soon going to be mixerless, previously having used my partners O2R. I have a Nuendo/Logic Audio based Powermac G4 Dual 800 RME hammerfall based system with some nice outboard (Tubetech SMC2A, Avalon stereo EQ, Waves L2, Orville). I was going to get a Houston for fader control but am considering a AW4416 if I can use it to control my mixing software on the computer. However I would also like to use the optional digital I/O to route my Orville/Waves into the system. Could you address these issues.
1) What are the capabilities for sends and returns digitally? I Have Spif/AES/lightpipe issues
2) Do you use a Lucid or similar box for global wordclock?
3) Do you use a digital patch bay or format converter to get everything talking to each other?
4) How does the combo of waves and yamaha fx stack up in terms of quality? relative to ourboard ie: tc M2000. Mone, Mtwo, PCM 91 etc.
I know it's a lot of stuff any comments would be helpful as I can see you have a high level of expertise.
regards,
raregroove in NYC
Originally posted by raregroove: Phil, Your posts are really i
Originally posted by raregroove:
Phil,
Your posts are really informative. I had a question. I am soon going to be mixerless, previously having used my partners O2R. I have a Nuendo/Logic Audio based Powermac G4 Dual 800 RME hammerfall based system with some nice outboard (Tubetech SMC2A, Avalon stereo EQ, Waves L2, Orville). I was going to get a Houston for fader control but am considering a AW4416 if I can use it to control my mixing software on the computer. However I would also like to use the optional digital I/O to route my Orville/Waves into the system. Could you address these issues.
Well, the AW can certainly be used as a controller for Logic - I'm sure the same can be said for Nuendo, but you might have to "roll your own" MIDI cc templates...
As far as busing to external efx, the AW has 4 omni (analog) outs... but you want to go digital, correct? There's only one S/PDIF I/O, and you can certainly assign one of the 8 aux sends to that, but it may not be enough for everything you want to do. You can go with lightpipe for any effects units that support that (like the new Kurzweil), which can work well, or use lightpipe and a Z-Sys for multiple asynchronious S/PDIF and / or AES digital.
1) What are the capabilities for sends and returns digitally? I Have Spif/AES/lightpipe issues
Again, only one S/PDIF I/O... although you can get an AES card for it too, if you need more digital connectivity.
2) Do you use a Lucid or similar box for global wordclock?
Yup - Lucid GENx6. I really like it. My DAW (Frontier Design Dakota / Montana) has W/C in on it, as well as my two AW416's, and they're all connected to the Lucid.
3) Do you use a digital patch bay or format converter to get everything talking to each other?
I use a M Audio Digipatch 12 X 6, but just so I can connect things differently as needed. I've got 32 channels of lightpipe on the Dakota / Montana cards, and (depending on what cards I have in the AW's at the moment) 32 channels of lightpipe there, plus two 20 bit ADAT machines (another 16 channels of lightpipe I/O), so the Digipatch allows me to change lightpipe routing as needed without having to do anything other than recall a stored preset.
4) How does the combo of waves and yamaha fx stack up in terms of quality? relative to ourboard ie: tc M2000. Mone, Mtwo, PCM 91 etc.
The onboard Yamaha efx are pretty good, but not stellar. As usual, better results are obtainable with a bit of careful tweaking. They're roughly comperable with the REV500 in terms of quality, but with more variation in effects types, and because there's no analog interfacing and ADC DAC's involved, it's quieter.
Personally, I'd say the Waves card is, for all intents and purposes, the exact equal of the Plug In bundles. If you've used those on a Mac or PC, you know what you're getting.
I know it's a lot of stuff any comments would be helpful as I can see you have a high level of expertise.
regards,
raregroove in NYC
Thanks for your kind words. Sorry it took so long to answer this - I have not checked this thread for a while. I hope I answered everything okay, but if you have any additional questions, please feel free to ask!
Originally posted by Raticus: Sorry to intrude... I am inters
Originally posted by Raticus:
Sorry to intrude...
I am intersted in the 4416.. how good are the converters a/d? and in the case of being a controller will the faders react to the automation of Nuendo?
Raticus
No intrusion at all - feel free to ask away! :)
IMO (and those of some other very knowledgeable and experienced folks) the ADC's and DAC's in the AW series are pretty darn good... certainly noticeably better than those in the 02R - but since the 02R uses 20 bit converters, you might think that's to be expected... but actually, a good 20 bit converter can sound better than a so-so 24 bit converter.
If you've looking for some VERY high quality converters, there's the Apogee option card available for the AW machines which is a great option.
As far as MIDI control of Nuendo, I'd say you shouldn't have any problem with it - but I'm a Logic / Sonar / Vegas user, and not a Steinberg user, so I can't speak about the MIDI support in Nuendo. Assuming Nuendo can transmit / record and respond to MIDI CC data (and I'd be VERY surprised if it can not!) you shouldn't have any problems.
Let me know if you have any more questions - it's not a problem!
Thanks for the response... upon talking with OPUS2000 he told m
Thanks for the response...
upon talking with OPUS2000 he told me the unit has a mix and match of balanced and unbalanced analog inputs won't this give a difference in the quality you get from you inputs? This has really turned me off about the unit and I am thinking about just upgraded my Pc based setup maybe getting me some high end a/d converters and a better control surface... what do you think?
Originally posted by Raticus: Thanks for the response... upon
Originally posted by Raticus:
Thanks for the response...
upon talking with OPUS2000 he told me the unit has a mix and match of balanced and unbalanced analog inputs won't this give a difference in the quality you get from you inputs? This has really turned me off about the unit and I am thinking about just upgraded my Pc based setup maybe getting me some high end a/d converters and a better control surface... what do you think?
No offense to Opus (a very sharp guy), but he's wrong on this one. You can believe me - I've got two of these things sitting 6' away from me as I type this - the inputs are all balanced. Inputs 1/2 are on XLR and 1/4" TRS balanced connectors and have phantom power and can handle mic or line levels. Inputs 3-7 are 1/4" TRS balanced, and can handle mic or line levels, but do not have XLR jacks or phantom power - you'd need external phantom power supplies for those jacks if you want to use moer than two phantom powered condenser mics at once (Rolls makes a 6 channel single rackspace unit that lists for $150, and have XLR inputs and 1/4" TRS outputs).. or you can just use XLR to TRS adapters if you're going to be using dynamic mics with those inputs.... while the connector is different (XLR vs. 1/4" TRS), the connector is still balanced.
The ADC (converters) and preamps are otherwise identical, and other than the phantom power and different type of balanced jacks, are otherwise identical and SOUND identical.
Nothing wrong with upgrading your computer.. if that's what you decide. I guess it all comes down to what your needs are and what your preferred methods of working are... and maybe your musical tastes... do you do a lot of Rap or House where you'd be doing lots of editing? Then a computer DAW may make a better "fit" for you. Doing more acoustic music with "real" instruments? Maybe the AW would be better... I personally use both, and see advantages to both... and having both allows me to much more easily do thigs that would be difficult with only one or the other. They make a very powerful system in combination....
Tell me a bit more about what you already have and what you want to do and I'll see if I can make some suggestions for you.
Cheers!
Oops, I left off input 8. It too has a 1/4" TRS input (mic / lin
Oops, I left off input 8. It too has a 1/4" TRS input (mic / line) but also adds a high impedence input for use with guitar or bass.
Again though - you don't HAVE to take my word for it ;) - Check out the specs over at http://www.aw4416.com
I'm looking forward to hearing about your system and what your desires for it are.
Take care,
My current setup is as follows: 900 Athlon a7V asus MB 628
My current setup is as follows:
900 Athlon
a7V asus MB
628 Mb ram
Plextor 12 X crw drive
ATA 100 7200rpm 30 gig hd
ata 66 5400 20 gig hd
echo layla 20
us 428
Nuendo 1.53 release
ART tube MP
Marshall MXL 1006
CAD 95ni
Orban Parmetic EQ
I want to make my system better I have about 3,000 to spend... I currently work on Hip - Hop projects tracking beats and recording vocals and mixing.. I was considering buying AW4416 but because of the balanced and unbalance analog i/o I am not confident in achieving consistent quality from the unit for tracking or dumping..
My goals are to produce Masters from this setup only thing I will not do from my studio is Mastering.
I was thinking maybe adding the Nuendo 8 I/o and 9652 card to get a better quality into Nuendo and to also expand my analog i/o to 16. I was also considering selling the us-428 and getting the Houston with it's motorized faders and natural support of Nuendo, also maybe upgrade to the Studio Projects C1... Any suggestions would be apprieciated
I've been using my AW4416 since October 2000. I was one of the f
I've been using my AW4416 since October 2000. I was one of the first to get one, and was also one of the beta testers for the Y56K Waves card last summer.
I'm working on a jazz CD - a genre most of you are probably not interested in - but take heart: if you have any questions about the machine, just post them here, and I'll do my best to answer.
I've been an active member at the Yahoo AW4416 site, and have tried to help many other users. It's a complex box, but capable of high-end audio when used right.
Fair Winds.
Capt Dan G>
I've recently been using an AW4416 and have had various buggy pr
I've recently been using an AW4416 and have had various buggy problems. Initially, glitching and noise on playback which often progressed into a crash. Since then swapped the hard drive and installed v2 software. No glitching/noise now, but on a number of occasions it's locked up when attempting to play back - the button lights up but nothing else happens, and I have to restart.
Anyone else had similar problems?
David
It's a comfort to know that whatever glitches can be taken care
It's a comfort to know that whatever glitches can be taken care of.
I just got one, must have been on the shelf for a while, has the next ver down software, so getting it together for the ver 2.0 upgrade. I loaded up the demo and am slowly starting to get a handle on the goodies. I record myself mostly, and this with my analog board and outboard gear is going to work great, and with 100 plus tracks, automation, and built in dynamics and eq, I shouldn't want for much more.
What a fantastic piece of engineering. They have their own website too! Like a mini Fairlight (sorta).
--Rick
Hi. I'm using the 4416, although I'm not yet an expert. :p Bu
Hi. I'm using the 4416, although I'm not yet an expert. :p
But, um, I don't know what OMF is. :roll: