You bought the 820, didn't you?

thats the 1...lol

Can you take a pic of the back and post it?

My old Tascam M520 had a lot of RCA's on the back, and the old balancing amp.
I had a lot of jumpers on that bad boy.
It also had the RCA inserts that you had to jumper to complete the connection when you weren't inserting anything.

yeah I get a pic up itll take a couple of days..lol
I dont have a camera

but all the Direct outs are RCA the Tape returns are Rca
the bus sends are RCA both +4 and -10 16 of each of those
line inputs are 1/4 in
and Mic XLR oviously..

Main outs are xlr and Rca

Inserts are TRS go figure...lol

fx sends are 1/4 left and right retuns are the same

Well, sounds like you're in the same boat I was.
The sends and buses are unbalanced.
I just went and bought a bunch of RCA to 1/4" 8 pair snakes to deal with it (luckily, our A/D was a MOTU 24I/O - 1/4" ins and outs).

I don't think there's a work around internally for those boards.

Idid find a solution to the inputs.this will rquire changing the rca's to TRS and a little circut to go with it, but still looking for a solution to the out puts..

ok upon futher reading of the Manual. Duh
I dont have to worry about the inputs, the line inputs on the Ramsa are TRS Balanced. Now Il just have to convert the buses and the main outs to balanced