Im very curiouse about all this analog stuff I keep reading. I read in an article that a lot of short budget pro's are tracking to digital and then mixdown to an analog reel 2 reel and then back into the DAW to add more warmth, punch and depth to the music. By "short budget pros" I mean, Professional recording engineers that still dont have the cash to pay for a full blown 24 analog reel to reel. If this method really helps it would be used to record mainly rock music.
I would like to hear what you guys have to say about that. Waste of time ? or do they really help? How amny of you practice it, tell me your expirienes.
Would a Tascam BR-20 or a OTARI MX 5050 2 TRACK RECORDER be a wise choice for this? thanks for all responses in advanced.
Comments
Member for
23 years 10 monthsArrangement/Performance, Mic Placement, balance and Mix will all
Arrangement/Performance, Mic Placement, balance and Mix will all yeild signifcantly greater increase in results than any digi/analog differrences. period. Of course experiance plays into that as well. If you don't know where to go and what to adjust, you'll have to learn.
Your'e asking the right questuions. That's a step in the right direction. This stuff takes years to learn, for most of us. Keep at it.
Member for
20 years 4 monthsRecorderMan wrote: Your'e asking the right questuions. That's a
Thanks alot man, helpfull tips from people like you and other in this forum have really taken me far in my studio. I have seen ALL the pages from this forum and the "Studio equipment"forum, took em almost 2 weeks. We can write a book out out of all the stuff that's been discussed here. Thanks again!!
Juan
Member for
24 years 4 monthsyea but i wish i had a deck that ran at 15ips those sound great
yea but i wish i had a deck that ran at 15ips those sound great
Member for
24 years 4 monthsHMNP wrote: I would like to hear what you guys have to say abou
All of my mixes go down to an ATR 102 1/2" machine. It makes all the difference in the world.
Member for
24 years 4 monthsa top engineer likes 1/4 15 ips the best
a top engineer likes 1/4 15 ips the best
Member for
24 years 4 monthsmikE@THECAVE wrote: a top engineer likes 1/4 15 ips the best ha
ha ha ha
Member for
24 years 4 monthsall right i had to get the article his name is tchad blake gramm
all right i had to get the article his name is tchad blake grammy award winner.This guy says he also always has a stereo compressor on the mix bus even during tracking so he can get an idea what it gunna sound like
Member for
20 years 4 monthsHey dustbro, is that at 30 ips or 15? And do you hit the tape ha
Hey dustbro, is that at 30 ips or 15? And do you hit the tape hard? or do you stay under +3dbs
As far as pro's using 1/4 the best, better check again man. I believe most mastering places that have analog tape have 1/2 mainly
Member for
24 years 4 monthshome recording mag oct.2002 read for yourself man
home recording mag oct.2002 read for yourself man
Member for
24 years 4 monthsmikE@THECAVE wrote: home recording mag oct.2002 read for yoursel
Dude.. I sit in pro mastering facilities all the time... there is no question that not only does 1/2" tape sound the best, but the BEST sounding 1/2" is an ATR. Dont believe me? Call Sterling Sound, call Masterdisk... they'll tell you. Better yet...
http://www.sterling-sound.com/home/engineers
Ted Jenson - Studer A-820 + Ampex ATR Stock & Tube Pre-Amp
Chris Athens - Ampex ATR-102
Craig Calbi - Ampex ATR-102 + Studer A-820
Tom Coyne - Ampex ATR 102
Chris Gehringer - Ampex ATR 102
George Marino - Ampex ATR-102
Should I go on? They mastered 53 out of the top 100 on Billboard this week. How's that for proof.
Anyway, I like to be conservative with my tape. I run 499 or GP9 at +6/185 (30ips), and touch around +2 at the heavy places.
Member for
20 years 4 monthsWow, I just received the price lists for the ATR-102 1/2 and I c
Wow, I just received the price lists for the ATR-102 1/2 and I can't afford that. Anyone know where I can get a 1/2 30 ips 2 track machine that's not too expensive?
Member for
24 years 4 monthsnandoph8 wrote: Wow, I just received the price lists for the ATR
If you're on a budget, a 1/2" probably isn't going to fit in the picture for you.
Old MCI tape decks will probably be the way to go. In my opinion, even the JH24 (2" 24 track) has more "character" than a Studer or Otari tape deck... Some people I know use 2" machines to mix down to (using a pair of tracks as a stereo mixdown device of course) and then bounce back to digital 96K for the final master. The old JH24's go for about $2000 in great condition, and I've seen some pretty cool ones going for $900 on ebay.
Another option is to head in the 1/4" tape realm.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=3278&item=3753228484&rd=1
Excellent machine for $600. It's no ATR102, but it's pretty fuckin good.
Member for
22 years 7 monthsdustbro is right on about the MCI JH24's ... great machines, man
dustbro is right on about the MCI JH24's ... great machines, many still in use around the world. Think "Eagles" if you wonder about the sound .. a lot of their stuff was done on MCI consoles and tape machines as was Eric Claptons Layla and subsequent records. All the stuff from Criteria Studios in Miami was MCI gear.
I had a JH24 for a few years and loved it to death ... some maintenance involved though. I also had a JH110B 1/4" 1/2 track machine that ran at 15 / 30 ips ... I liked tracking on the JH24 at 15 ips and then mixing to the 110B at 30 ips .. putting the tape hiss from each machine in different octaves really helped to keep the noise levels low..
A good JH 110B can be found for under $1000 ... but you will have to have JRF make you a 1/2" head stack and rollers / guides to do a conversion to 1/2" ... and that will cost a lot more than the machine did. But the JH 110B was designed to handle up to 1" tape (for 8 tracks) so it should do fine as a mastering deck with 1/2" tape.
Member for
20 years 4 monthsI use a 1" 30ips machine, should I mix down to it from my DAW
I use a 1" 30ips machine, should I mix down to it from my DAW
Member for
20 years 9 months"Some people I know use 2" machines to mix down to (using a pair
"Some people I know use 2" machines to mix down to (using a pair of tracks as a stereo mixdown device of course)"
I don't understand this, using a pair of tracks ?
Do you mean they are using more tracks on the tape device for two track mixdown ? But then you get tracks with the same sound ?
Thank you.
Member for
20 years 9 monthsHi, Can anyone explain ? This week I will mixdown a project to
Hi,
Can anyone explain ?
This week I will mixdown a project to tape, maybe it sounds better with this technique....
Member for
24 years 4 monthssneak wrote: "Some people I know use 2" machines to mix down to
Run your mix to tracks 1+2 of a 2" machine.. then when you run out of tape, leave track 3 empty (to reduce tape crosstalk) and then start printing on tracks 4+5. Rinse and repeat... when you're done, you can bounce the stuff back from 2".
Member for
20 years 4 monthsSo if I record the same signal (left cahnnel) into 3 or 4 tracks
So if I record the same signal (left cahnnel) into 3 or 4 tracks I will get phase problems?
Member for
24 years 4 monthsnandoph8 wrote: So if I record the same signal (left cahnnel) in
I don't think we're on the same page.
a mixdown device is usually a 2 track machine. one track for your left channel, and one track for your right channel. instead of feeding your stereo mix to a 2 track machine, you can mix back to tracks 1+2 (in stereo) of a 2" machine, not print your left channel to 3 tracks of the 2".
Member for
20 years 4 monthsI understand that but I have a 16 track one inch and am wonderin
I understand that but I have a 16 track one inch and am wondering if I could use 1/2 of the tape to mix down to by combining 4 tracks as one for left and another 4 tracks as right. Some one told me I would get phasing problems...
Member for
20 years 9 monthsYes, that's also what I want to know.
Yes, that's also what I want to know.
Member for
24 years 4 monthsnandoph8 wrote: I understand that but I have a 16 track one inch
Depending on the azmouth of the machine, you will get some phasing issues. The only way to do it properly is to get a 1/2 head stock and rollers for your machine (if they even make them).
Member for
20 years 6 monthsI have an ignorant question. Would my mixes benefit from recor
I have an ignorant question. Would my mixes benefit from recording/editing digital....bouncing to tape and hitting the tape hard for warmth...then bounce back to the digital domain to prepare 24bit aiff files for mastering? Or should I just record to tape then bring everything into the DAW for editing? I can see benefits on both sides, but I wanted to see if the first option would make a difference.