Skip to main content

--
Arghhhhhhh! pleeez help some body!

I got cool edit pro 2.1, been working kinda ok for about two months. I recently hook up a bit of hardwear (mpc200xl) to record x8 into my terratec sound card,

I keep getting "glitches" in my recordings! I read the manual and changed the latency setting in the cards control panel and it seemed to sort out the problem but, the damn thing started doing it again last night and any thing I change on the control panel doesn't do a thing or make it slightly worse!

do I have a deeper problem here than just a configuration problem?

Topic Tags

Comments

anonymous Tue, 02/01/2005 - 17:42

free up as much ram as you can. If its not a dedicated audio computer disconnect the network cable, and go to Start : Run and type "msconfig" Click the startup tab and deselect everything except the software for your soundcard. If you can't figure out what that is, go in and deselect everything that looks like adware, virus software or any of that. It'll make you restart your computer and then see if your sound card still works. If it does you might be alright. Increase your latency and make sure you have the most current driver for your soundcard.

k

anonymous Wed, 02/02/2005 - 17:45

Its all about Memory

The best thing i can suggest is that you expand your memory. RAM is key in cool edit pro 2 since thats what i have been using for a good while now. if you get any type of glitches like loud popping noises. save and restart your app. also you can solo/mute certain tracks for the better of the recording and then mix down later. but like i said b4 the more memory you have the less fucc ups you have to worry about with cool edit pro....or you can switch to Sonar 3 producer edition which you can find on any p2p file sharing program.
Good Lucc!