Ok..I'm running Pro Tools on a Digi002 off a Apple G5 dual processor computer.
question: within a session, say i have 7 tracks for the drums, is it a common practice to bounce the 7 tracks to one full drum track and then open up a new session and add the guitar, bass, etc. . b/c i''ve been doing it where say i have the 7 drum tracks, then i add a few for guitar, a few for bass, and ive been getting some errors cause the comps slowing down b/c theres so many tracks.
part of me thinks its a good idea to keep things running smoothly but the other part of me think its not a good idea b/c it doesnt allow the freedom of tweaking individual drum parts in the future.
so since I'm a relative newbie, can someone fill me in on the proper approach to this...
thanks guys...
Comments
tonybran wrote: but even so, is that procedure of bouncing down
tonybran wrote: but even so, is that procedure of bouncing down the drums to one track before adding other instruments normal to do?
No. It would only be necessary (or "normal") if you are approaching your track count limit (32 on Digi002).
In your case, more than likely, your computer is not up to snuff. You're having to work around its inadequacies instead of focusing on what is most important: the music. Get the computer up to speed, literally, and you'll probably not have any more problems.
Yeah, I would say something is out of whack. You shouldn't have
Yeah, I would say something is out of whack. You shouldn't have to work like that. I would think having a 2nd internal hard drive for your audio files would definitely help, but a G5 shouldn't be choking that easily anyway. And no, before it even starts, I don't think this qualifies as proof that PC's are better than Macs, so don't bother going there, trolls.
tonybran wrote: Ok..im running Protools on a Digi002 off a Apple
Sounds like a classic case of not enough RAM in the machine. Do you have less than 1GB of RAM? If so, increase it to that point and see if you still have the problem.
~S