I'm thinking about building myself a new DAW.
I haven't decided anything yet, but I'm thinking about buying the Intel Core 2 Quad Q6600 2.4GHz 8MB L2 cache cpu. Does anyone have any experience with this cpu in a DAW?
But my biggest dilemma is not which cpu to choose, but which combination of cpu/motherboard I should choose.
I'm not planning on buying a new sound-interafce, and therefore I'll need to connect my M-Audio Firewire 1814 to it. I do a lot live- recording and use my laptop with this interface, so the DAW workstation is primarily for post-production, in addition to some Csound/MaxMSP programming.
Does anyone have any tip/hints?
Comments
Just a note: Just got an Asus mobo - ATHLON DUAL CORE cpu. Had a
Just a note:
Just got an Asus mobo - ATHLON DUAL CORE cpu. Had a terrible time getting my TASCAM US-122 drivers loaded.
Turns out (acording to the geek!) the VISTA-ready boards are different. He installed a USB card and everything was fine. Man this thing is FAST!
Got it to support CUBASE SE 3 so I can't comment on end results yet.
Just a note: Just got an Asus mobo - ATHLON DUAL CORE cpu. Had a
Just a note:
Just got an Asus mobo - ATHLON DUAL CORE cpu. Had a terrible time getting my TASCAM US-122 drivers loaded.
Turns out (acording to the geek!) the VISTA-ready boards are different.
He installed a USB card and everything was fine. Man this thing is FAST!
Got it to support CUBASE SE 3 so I can't comment on end results yet.
P.S. Also issues with NVidia chip sets(according to TASCAM).
Thanks for the tips guys! I think I will wait until the summer i
Thanks for the tips guys!
I think I will wait until the summer is over before i decide which CPU to buy. I think AMD is going to release their first quad-core cpu during the summer.
I haven't been very active on the compability issues concerning chipsets and audio software, but I remember there was some problems when nvidia switched from nforce 3 to nforce4? or am I wrong? but that's a year, or something, ago so it's probably not at problem anymore?
Asus P5B Deluxe We just put together a DAW using the Q6600. We
Asus P5B Deluxe
We just put together a DAW using the Q6600. We had the same question...which MOBO? Most of the folks over at AudioForums.com suggested the Asus P5B. We went with the P5B Deluxe. There is a newer motherboard, the P5K, but it has a newer chipset. We opted to stay away from a new chipset until tried and tested by other guinea pigs :lol:
Works great so far. We haven't stress tested it yet though.
Last [="http://www.dailytech.com/article.aspx?newsid=7574"]rumou
Last [="http://www.dailytech.com/article.aspx?newsid=7574"]rumour[/]="http://www.dailytec…"]rumour[/] I heard about AMD's quadcore. And [[url=http://="http://www.anandtec…"]this[/]="http://www.anandtec…"]this[/]. Don't hold your breath, unless you really want to have an AMD system and/or are willing to wait a bit longer.
C2Q Xeons are used in the new powermacs. Intels quadcore is OK then, is it not? I am curious about AMD's (native) quadcore, though.
I now have an AMD 3800+ X2 (s939) with NVIDIA nF4 chipset. I use Cubase and ProTools (MBox2). The problems with nF4 seemed to focus on PCI performance. Because I work with FW(mLAN) and USB, I had no problems for me. NVIDIA got it down after a few revisions.
I'm shopping for a MBD, and would like some clarification on the
I'm shopping for a MBD, and would like some clarification on the TI Firewire issue. I'm currently running a P4 2.4 GHz on an Asus P4B266 which does not have Firewire. I bought a cheapo firewire card so I could plug in my new Echo Audiofire12. I had seen the hype around the TI firewire controllers, so I did not look for that. The firewire card I'm using has the Agere FW323 chip. I haven't done a lot of recording with this setup, but I just finished two nights of 8-track location work recording a 90 minute concert two nights. No problems, no errors.
I've been eyeing the P5K series of ASUS motherboards, but they don't have the TI firewire chip. They use the same Agere FW323 I have on my PCI card. What's the issue with the non-TI firewire chips. Is it specific to a particular interface? What's the deal?
The main thing I've come to believe in is if you are using an IN
The main thing I've come to believe in is if you are using an INTEL CPU, an INTEL chipset is a good choice. I've just started collecting pieces for a new machine - I've had good luck with ASUS motherboards and that's the direction I intend go to. NO EXPERIENCE with new boards and CPUs, but my choice at this point is an ASUS P5B with RAID - there are a few options - not sure which one I'll go for yet.