hi marjohn,

you have to select (highlight) the according track you want to trigger, (if it is an audio instrument, make shure it is selected / loaded into the audio instrument channel as well, under audio channel I/O you can select which software instrument you like to have under that channel... or if you want to trigger hardware, like a rackmount synth say, make shure you select the right midi channel (click hold on the trackname and a box will pop up where you can select between audio instruments, midi, audio tracks and so on...)

hope it helps :D

Logic Express

Hi:

I tried the instructions you gave, but still no sound. I have disconnected everything and only leave the midi keyboard which is connocted via the USB port. When Logic is loaded it has about 10 instruments loaded in different tracks. I select the track, you can see the system receiving data, but still no sound. Garage band does play sound.

Mark

make sure you are using an audio instrument track, and make sure the track is routed to the propper output channel.

Or if you have 7.1 load a Garage Band song into Logic and it will create an enviorment that you can use as a template.

8)