Skip to main content

Creating Lexicon PCM 91 presets

anonymous
Submitted by anonymous on

Hello,



I'm using Lexicon PCM 91 and would like to create own presets from the existing (factory pre-built) ones. I used preset "M HALL*STAGE" in "PRO MODE". After editing the preset I tried to save it under REGISTER BANKS. The customized preset was saved, but some of the settings were signed with dot (.) and - consequently! - not saved. Those settings are the following: LOW RT, PRE DELAY, MSTR DLY, HIGH CUT.

After restarting PCM 91 , the named settings were restored with previous, not the modified values.

I also tried to save the modified preset on different locations, but the results were the same.



Any suggestions for the problem described?



Thanx in advance,

Tadej

Tags

Comments

Profile picture for user pr0gr4m
pr0gr4m

1.5 Mem Protect

The PCM 91 provides a memory protection feature to prevent

accidental overwriting of your stored effects. When this control is

set to On, pressing the front panel Store button will cause an error

message to be displayed. The PCM 91 is shipped with the Memory

Protection function turned Off.



Make sure this is turned off.

Thu, 01/12/2006 - 10:17 Permalink