x
ChrisH 29 January 2015

Looking for solutions to hang 6 inch thick 2ft x 4ft Ridged Fiberglass panels for bass trapping clouds

Has anyone tried to hang 6 inch thick 2X4 panels with these Rotofast Insulation Clips?
http://www.atsacous…

Comments

DonnyThompson Fri, 01/30/2015 - 03:53

I've never used them. When I hung my cloud - 2 x 4 @ 4", I first covered it with material, then ran a stiff wire up through the fabric and the panels with a washer on the bottom side - so that it wouldn't pull through from the weight - and then attached the wires to standard drywall hooks in the ceiling...

Although I'll say that the way you are looking at looks to be a lot easier than the way I did mine. ;)

Reverend Lucas Fri, 01/30/2015 - 07:50

I use the Rotofast clips for 2", 2'x4' rigid fiberglass panels. They work great in that application, but I'd be concerned about using them with Rockwool. Rockwool comes apart more easily than rigid fiberglass, and I suspect the Rotofast clips would pull out of the material. Being 6" thick also means susbstantial weight hanging from the ceiling. I hate to be the bearer of bad news, but I'd look elsewhere.

ChrisH Fri, 01/30/2015 - 09:08

Reverend Lucas, post: 424468, member: 48050 wrote: I use the Rotofast clips for 2", 2'x4' rigid fiberglass panels. They work great in that application, but I'd be concerned about using them with Rockwool. Rockwool comes apart more easily than rigid fiberglass, and I suspect the Rotofast clips would pull out of the material. Being 6" thick also means susbstantial weight hanging from the ceiling. I hate to be the bearer of bad news, but I'd look elsewhere.

I meant Ridgid fiberlass board, sorry for the confusion.

Reverend Lucas Fri, 01/30/2015 - 09:38

ChrisH, post: 424471, member: 43833 wrote: I meant Ridgid fiberlass board, sorry for the confusion.

You'd probably be in better shape, in that case. Still, 6" rigid fiberglass is not light, so it might take a few of these per panel. I used four per 2" panel. Eight clips seems like a lot per panel, but I might suggest that many with panels this thick. I could be wrong. Six may do it. Maybe you could ask the manufacturer?

ChrisH Fri, 01/30/2015 - 12:39

Reverend Lucas, post: 424473, member: 48050 wrote: You'd probably be in better shape, in that case. Still, 6" rigid fiberglass is not light, so it might take a few of these per panel. I used four per 2" panel. Eight clips seems like a lot per panel, but I might suggest that many with panels this thick. I could be wrong. Six may do it. Maybe you could ask the manufacturer?

Good to know. Yeah the manufacture doesn't know the weight they'll support.

x

User login