Did you change Logic's Sample-Rate in the Audio-Menue?

Ya.. That's the one that won't change unless I change everything else around..
It's weird..
Brian.
It's still doin it..

http://www.emagic.de/english/support/download/update.html

try it

Done 4.81 update..
Still there..
I'm running logic on internal for now..
Seen as my new Daw is really stable I don't shut it off otherwise "digi hell"..
I got the well it's logic's fault from Motu and it's Motu's fault from Logic..
Annoying to say the least
Brian

Just to verify - you can set logic's sample rate in two different locations:

In the AUDIO HARDWARE + DRIVERS page AND from the main AUDIO MENUE

but you've propably done this, have you!? ;-)

Ya..
In the drivers page it opens MOTU's driver page..
It changes easily to 48k..
But if I go into Logic's sample rate, it stays on 44.1k..
I've stumped Emagic and Motu on this one..
Like I say.. I can get it to set to 48k but I have to go through all those steps to get it there..
Luckily I don't have any video work for a bit so I can work at 44.1 for a bit..
Man is it annoying..
Any help would be welcomed..
Thanx.
Brian

Heres what I have found, and I use a very similar setup.

Restart your computer without opening any programs. Go in to the MTP AV software console and make sure via the software that it is sync'd to 48 and stable. Save your setup. Now close down all, turn off MTP AV, Back on MTP AV, restart computer and check that it has reinitialized to 48.

Now opn the 324 console interface and make sure it is set to whereever you have the MTP AV set as the source for the clock and also select 48. Save; exit, start; verify.

Now open Logic; Go to Audio Hardware setup, select ASIO, open the dialog box and verify that the 48 is still selected.

I have found that if you try to alter the rate via Logic hardware setup, it doesn't stick all the time. The order I've given has worked for me, ever since 4.2.