The Firepod doesn't have phase reverse, so I'm wondering if anyone knows of a small phase reverse box that will fit into the chain between the mics and the Pod. At the moment I'm using phase reverse 'after' recording, but for headphone mixes and convenience, I really want to get it reversed before it gets recorded.
Any help is greatly appreciated!
Tags
Comments
I have small boxes with phase and pad switches makes for easy o
I have small boxes with phase and pad switches
makes for easy on the spot comparisons
a simple XL to XL adapter with phase change ... like the simple inline pads
you can even get these inline xl to xl with limiters built in
probably diode or fet based chopper limiter
beware that you need to look at charts for Mic interfacing and n
beware that you need to look at charts for Mic interfacing and not the standard line level 600 interfacing
... it could still work but the listed attenuation will not be correct
read this
http://www.uneeda-audio.com/pads/
here is a calculator
http://www.rapco.com/catalog/tpad.html
use the H pad
Shure offers an XLR tube that reverses the POLARITY of the 3-pin
Shure offers an XLR tube that reverses the POLARITY
of the 3-pin source. I believe that Audio-Technica and Whirlwind offer devices for this, too. You can also check out Switchcrafts' website. I think that they offer an empty "tube" wth connectors so that you can wire up your own DIY polarity reverse circuits.
Make a few XLR f to XLR m jumpers that are out of phase, 12" or
Make a few XLR f to XLR m jumpers that are out of phase, 12" or 16" long.