Skip to main content

whats the best way to clock theses devices together for Pro Tools,ie, which should be master also bearing in mind that i want to use the ADAT edit for trnsferring audio i/out as well.

Comments

Guest Thu, 03/28/2002 - 04:38

Good question.

While waiting for the answer to turn up ...why not list all the digital i/o gear in your set up...With what youi have so far, it looks like you could do with a 'house' word clock' - one quality, dedicated box that pumps out w/c to everything.. £500 might do it. This would 'tighten up' the SOUND of all audio running through your gear and bring higher highs and lower lows.. The improvement on an 888 was stunning I found when I added house W/C to my studio.....it made a scrachy acc gtr sound rich, warm & expencive sounding....

A Lucid GenX6 is might be just the ticket...

Jules

:w:

Guest Thu, 03/28/2002 - 12:20

[="http://www.lucidaudio.com/products/product_genx6_info.htm"]http://www.lucidaudio.com/products/pr oduct_genx6_info.htm[/]="http://www.lucidaud…"]http://www.lucidaud… oduct_genx6_info.htm[/]

Mercenary Audio
Foxboro, MA 02035
Tel: 508-543-0069
Web: [url=(dead link removed)

According to Jim Latimer of Lucid, whom I called on your behalf, Fletcher carries UK power suplies for Lucid gear & if not Lucid will get him some...