word clock

Alright gang,

I have a question about clock source settings in the UFX.

At the moment i have setup like this:

UFX ADAT out -> ADI8 ADAT in
ADI8 ADAT out->UFX ADAT in

Also i have a word clock cable going from the UFX wordclock out -> ADI8 wordclock in

Why I started this thread!

Man, Antelope Audio is on Fire!

Reverb Warning!

---

an old binaural recording I did of me playing clock chimes, sounds great on headphones.

https://docs.google.com/file/d/0BzeWmlLY97RSb081WnJoaFBuSms/edit?pli=1

no compression or any type of audio processing was used.

So I just topped my credit card again, to buy a Mytek ADC 96
My plan is to connect my Focusrite ISA two to the Mytek, then the mytek to my Focusrite Liquid Saffire 56 via spdif.
I also have a Octopre which is connected to the saffire 56 via ADAT.

I read the Mytek has a good clock so I want it as the master clock.

Clock Audio | Manufacturer of Quality Microphones | Boundary Microphones http://www.clockaud…

I want to transmit midi clock data to my SR16 drum machine so that when i hit record on the transport control and get a 2 bar count in my drum machine
kicks in on time after the 2 bar count so i can record it.

I can do this in Pro Tools easy, but am really struggling for some reason in reason essentials.

Please help!

I have audio that was sampled at 44.1 but the ext clock was set to 48k. Obviously now I need a way to change the file definitions to 48k so I can mix it at speed. Normally I would use 2 DAWs, set one to each sample rate, clock them together and digitally transfer. However I dont have two systems any more. Just my one PT rig. Is there any way to get at the definitions and simply change them?

Hey guys, i have a Saffire pro 40 and it can clock up to 92Khz on the interface itself and thats the highest. Now, would it be possible to clock it to anything higher by syncing it to a device like an Apogeebig ben?