Skip to main content

Optical Input in pro tools 7? how do i assign my octopre to a track?

anonymous
Submitted by anonymous on Mon, 07/05/2010 - 23:23

hey everyone, I'm using a Focusrite octopre and a pro tools le 7 system with the 002 factory board. Using an optical cable to connect the two, but i cant figure out how to assign the optical in to a track let alone which channel of the octopre..can anyone share their expertise?

thanks

Tags

Comments

anonymous
anonymous

BobRogers, post: 351165 wrote: I'm doing this from memory, so YMMV. Have the Octopre set to 44.1 and turned on. Turn on the 002. Start the computer. Turn on PT. Go to the hardware setup and set the clock to ADAT. Go to the Inputs setup. PT should recognize channels 9-16 as active. You can rename the something like Octo 1 through Octo 8, as desired.

awesome sounds easy enough, do you know if this will also leave channels 1-8 active?

Tue, 07/06/2010 - 18:46 Permalink