Problem with a Mackie 32:8

Submitted by MrKat on Wed, 04/20/2011 - 17:49

Hi guys,

I have 2 channels on my Mackie that are way too loud compared to others at the same level.

I have swapped cables with channels that are good and still have the same problem...

I have also checked that the whole channel is as it should be, just like the others. Even moving the fader up and down just increases and decreases the volume, but at a higher volume than that of the other tracks.

Faulty fader?

Comments

TheJackAttack

If the fader moving adjusts the volume from nothing increasing a

If the fader moving adjusts the volume from nothing increasing all the way to the top, it probably isn't the fader. It might be the input gain at the top of the stick. Remy might have a better idea.

Wed, 04/20/2011 - 20:44 Permalink

Link555

I am guessing The feedback in the input gain section is open, do

I am guessing The feedback in the input gain section is open, does the trim pot at the top of the strip work?

Thu, 04/21/2011 - 06:30 Permalink

Problem with a Mackie 32:8

Tags

Comments

If the fader moving adjusts the volume from nothing increasing a

I am guessing The feedback in the input gain section is open, do