Hi All,
I've recently re-setup my Mackie 24.8 track, after about a decade of not using it.
The desk isn't bad, - and it does what I want it to do, However - If i record a track, and then play it back, the playback volume is way quieter than the initial recording volume..
hi, thanks for reading. .ive had a very odd fault on two parts of these speakers, my son was getting shocks when he touched his MacBook Air or mic or his audio interface, when he was at the same time touching his guitar which was plugged into his amp, his setup is quite straight forward. cr5x monitors.
Hi,
I have a Mackie ProFX8 V1.
My problem is that my MacBook just can't see it in Audacity.
Would anybody be able to help?
Many thanks.
i want to get inside and clean this Mixer. Great shape ... only (1) fader issue.
I’m new and have no idea how to open this up.
hi guys, could it still make sense in 2018, mix with an old but good Mackie 32/8? could I reach the same audio quality as an inbox mix? the idea is to use the daw for compression / effects and the mixer for the sum of the signals and the equalizer. thank you
I am planning to buy a low cost monitor for my homestudio mixing. Most offen i work with flute tracks. Do you prefer below monitor for my purpose ?
https://www.amazon.in/dp/B00KVEIY4E/?tag=r06fa-20
Hi, all! I'm a tech-challenged home voice-over guy. I have a Mackie board in the booth with me, but the phantom power for my mic actually comes from a separate Grace Design mic preamp outside. For "old school" phone patch, is there a way to connect either a corded phone directly, or via a Gentner MicroTel box, into the Mackie mixer for two way phone conversation with a client?
Have an older Mackie analog 8 Bus 8x2x2 board that has random computer noise occurring. Little 1/2 to 3 seconds of random frequencies, very low volume, but showing up on 1-2 LED segments across all 8 channel meters and the L/R as well. Definitely something internal to the board or external power supply. Not coming from any specific channel or inputs (have muted/disconnected everything.
Hi folks,
I'm in the process of putting my home studio together, but I'm having a bit of trouble getting two-way communication between my Mackie 24*8 bus mixing board, and a Tascam US-16x08.
I have limited experience with mixing boards, but a friend sold me the Mackie for "an offer I couldn't refuse".
I'm looking at getting an audio mixing board and want to spend no more than $200. At first I was going to get a Behringer 1204x with USB. However reading reviews and fourm entries I decided against it. Currently, I see the Mackie Pro-FX8 mixer. It offers all the features and more than the Behringer for the same price.
